능동 스너버를 갖는 2KW 소프트 스위칭 ZVT 역률 보정 컨버터 설계

Design of a 2KW Soft-Switching ZVT Power Factor Correction Converter with Active Snubbers

  • 박경수 (중앙대 전자전기공학부) ;
  • 김윤호 (중앙대 전자전기공학부)
  • 발행 : 2001.09.01

초록

In this paper a soft switching ZVT(Zero Voltage Transition) power factor converter using active snubbers is designed to improve efficiency and reduce voltage spike and parasitic ringing. The main switch achieves ZVT and the auxiliary switch operates with ZCS. A 2KW soft switching ZVT converter is designed with switching frequency 100kHz, output voltage 400VDC. Then the designed system is realized and experimental results show that the measured efficiency and power factor are over 97.45% and 0.997 respectively with an input current THD less than 3%.

키워드

참고문헌

  1. G. Hua, Ching-Shan Leu, Yimin Jiang, and Fred C. Y. Lee, 'Novel Zero-Voltage-Transition PWM Converters,' IEEE Transaction on Power Electronics, Vol. 9, No. 2, pp.213-219, 1994, March https://doi.org/10.1109/63.286814
  2. Virginia Power Electronics Center, 'CCM Single-Phase Soft-Switched PFC Converter,' Project Final Report, Oct. 31, 1997
  3. Ray L. Lin, Yiqing Zhao, and Fred C. Lee, 'Improved Soft-Switching ZVT Converters Using Coupled Inductor Based Active Snubber Cell,' Proceedings of VPEC97, pp.195-201, Sept 1997
  4. Ray L. Lin, Yiqing Zhao, and Fred C. Lee, 'Improved Soft-Switching ZVT Converters with Active Snubber,'Conference Proceeding of VPEC98, Vol. 2, pp. 1063-1069, IEEE 1998 https://doi.org/10.1109/APEC.1998.654029
  5. Unitrode corporation, 'UC3854A/B controlled power factor correction circuit design,' Unitrode product & applications handbook, 1997-1998