초록
NiCuZn 페라이트에 V₂O/sub 5/가 0∼0.5 wt% 첨가된 페이스트를 사용하여 스크린 인쇄법으로 페라이트 후막을 제조한 후, 870∼900℃에서 소결하여 V₂O/sub 5/ 첨가량에 따른 소결밀도, 미세구조 등의 물리적 특성 및 자기적 특성 변화를 분석하였다. 소결온도 870℃의 경우 V₂O/sub 5/를 0.5 wt% 첨가한 시편의 소결밀도가 0.58 g/cm³로 가장 hsvrp 나타낫고, 소결온도가 올라갈수록 소결밀도 차이가 줄어들어 900℃의 경우 모든 시편이 5.15g/cm³이상으로 높은 밀도를 나타내었다. V₂O/sub 5/가 0.5 wt% 첨가된 경우에 액상소결이 발달하였으며, V₂O/sub 5/가 0.1, 0.3 wt% 첨가된 시편은 입자성장이 억제되어 입자크기가 V₂O/sub 5/를 첨가하지 않은 시편보다 작았다. 전체의 소결온도 범위에서 V₂O/sub 5/가 첨가되지 않은 시편의 입자크기가 크고 균일하기 때문에 투자율이 가장 높게 나타났으며, 소결온도 880℃ 이상에서 V₂O/sub 5/ 0.3 wt% 첨가 시편의 Q값이 가장 높은 것으로 나타났다. 결론적으로 칩 인덕터용 NiCuZn 페라이트 소재 제조 시, 투자율값을 중시할 경우에는 V₂O/sub 5/를 첨가하지 않아야 하며, 품질계수를 중시할 경우에는 V₂O/sub 5/의 첨가량이 0.3wt%를 넘지 않아야 함을 알 수 있었다.
The purpose of this study is to investigate the effect of V₂O/sub 5/ addition on physical and magnetic properties of NiCuZn ferrite for multi-layer chip inductors. NiCuZn ferrite pastes doped with 0, 0.1, 0.3 and 0.5 wt% V₂O/sub 5/ were prepared and samples of ferrite sheets were prepared by the screen printing method. They were sintered at 870, 880, 890 and 900℃, and then their physical and magnetic properties were analyzed. After sintering at 870℃, the sintered density of the ferrite sheet doped with 0.5wt% V₂O/sub 5/ showed the highest value to 5.08g/cm³due to the best densification by the liquid phase sintering, while the microstructures of ferrite sheets doped with 0.1 and 0.3 wt% V₂O/sub 5/ showed and inhibited grain growth. Irrespective of the sintering temperature, the initial permeability of ferrite sheet doped with 0.5 wt% V₂O/sub 5/ was highest and after sintering beyond 880℃, the quality factor of 0.3 wt% V₂O/sub 5/-doped sample appeared to be highest.