한국공작기계학회논문집 (Transactions of the Korean Society of Machine Tool Engineers)

한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

초정밀가공기를 이용한 비철금속의 절삭특성에 관한 연구

A study on the cutting characteristics of non-ferrous metals using diam odd turning machine

  • 발행 : 2001.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The experimental study was the cutting characteristics of non-ferrous metals. The experimental apparatus was used the turning machine and diamond tool. This aimed at lading the optimal cutting conditions by measuring surface farm and roughness. Used non-ferrous metals were aluminum, brass and oxygen-free copper. As well, according to changing cutting conditions such as feed rate by measuring cutting farce and surface roughness and according to cutting conditions the non-ferrous metals studied about cutting properties.

키워드

참고문헌

  1. 기계와 재료 v.2 no.3 초정밀 절삭가공기술 이후상 (외)
  2. Proc. M.T.D.R. Machining and Measurement to Submicron Tolerance L.G. Whitten;T.G.Lewis
  3. Annals of the CIRP. v.32 no.2 Current Status in. and Future Trends of. Ultraprecision Machining and Ultrafine Materials Processing N. Taniguchi
  4. Annals of the CIRP v.32 no.2 Perceived Limitations on Future Advances in Ultraprecision Machining E.G.Loewn
  5. Annals of the CIRP. v.36 no.2 The role of Precision Engineering in Manufacturing of the Future P.A.Mckeown
  6. 大韓機械學會論文集 v.14 no.6 천연 다이아몬드 인선형태에 의한 Al 합금의 경면절삭에 관한 연구 김정두
  7. 韓國精密工學會誌 v.12 no.6 다결정 다이아몬드 공구를 사용한 Al-Si합금의 선삭과정에서 절삭특성에 미치는 Si함량의 영향 이경호;윤영식;이상조
  8. 기계공작법 김동원
  9. Annals of the CIRP v.32 no.2 Perceived Limitations of Future Advances in Ultraprecision Machining E.G.Loewn
  10. Metel Cutting Principles M.C.Shaw
  11. Matel Cutting E.M.Trent
  12. 한국공작기계학회 논문집 v.10 no.4 비철금속의 선삭에서 측면 경사각과 이송량이 표면거칠기에 미치는 영향 전재억;정진서;하만경