설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제13권10호
  • /
  • Pages.960-965
  • /
  • 2001
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지

액막류의 MHF점에 관한 실험적 연구

  • 김영찬 (안동대학교 기계공학부) ;
  • 서태원 (안동대학교 기계공학부)
  • 발행 : 2001.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The minimum heat flux conditions are experimentally investigated for the subcooled liquid film flow on the horizontal plate. The experimental results show that the minimum heat flux point temperature becomes higher with the increase of the velocity and the subcooling of the liquid film flow. However, the effect of distance from the leading edge of the heat transfer plate on the minimum heat flux is almost negligible. Also, the experimental results show that the propagation velocity of wetting front increases with increasing the velocity and the subcooling of the liquid film flow.

키워드

참고문헌

  1. ASME J. of Heat Transfer v.83 Film Boiling Heat Transfer from a Horizontal Surface Berenson, P. J.
  2. Int. J. of Heat and Mass Transfer v.5 Experiment on Pool Boiling Heat Transfer Berenson, P. J.
  3. Int. J. of Heat and Mass Transfer v.6 Onset of Stable Film Boiling and the Form Limit Spiegler, P.;Hopenfeld, J.;Siberberg, M.;Bumpus, C. F.;Norman, Jr.;A.
  4. J. of Heat and Mass Transfer v.23 The Role of Adsorption in Determining the Minimum Film Boiling Temperature Segev, A.;Bankoff, S. G.
  5. ASME J. Heat Transfer v.95-2;3 Lidenfrost Temperature-Its Correlation for Liquid Metals, Cryogenics, Hydrocarbons, and Water Baumeister, K. J.;Simon, F. F.
  6. Int. J. of Heat and Mass Transfer v.13 The Relationship of Quench Data to Steady-State Pool Boiling Data Bergles, A. E.;Tompson, W. G. JR.
  7. Int. J. of Heat and Mass Transfer v.30 Prediction Technique for Minimum Heat Flux Point Condition of Saturated Pool Boiling Nishio, S.
  8. JSME International Journal v.30-266 Film Boiling and Minimum Heat Flux Point Condition in Subcooled Pool Boiling Nishio, S.;Uemura, M.;Sakaguchi, K.
  9. Trans. JSME(B) v.60-574 Spray Cooling with Formation of Liquid Film(Distribution of Heat Transfer Coefficient in High Temperature Region) Kim, Y. C.;Nishio, S.;Ohkubo, H.
  10. Trans. JSME(B) v.62-594 Spray Cooling with Formation of Liquid Film(Film-Boiling Heat Transfer of Liquid Film Flow) Kim, Y. C.;Nishio, S.;Ohkubo, H.
  11. Korean J. of Air-Conditioning and Refrigeration Engineering v.12-10 Measurements of Heat Transfer Distribution in Spray Cooling of Hot Steel Plate Kim, Y. C.;Riu, K. J.;Seo, T. W.
  12. Int. J. of Heat and Mass Transfer v.13 Nonlinear Estimation Applied to the Nonlinear Inverse Heat Conduction Problem Beck, J. V.
  13. Int. J. of Heat and Mass Transfer v.35 On the Wetting Mechanism of Liquid Flow on Hot Surface Peng, X. F.;Peterson, G. P.;Wang, B. X.