High-Precision Contour Control by Gaussian Neural Network Controller for Industrial Articulated Robot Arm with Uncertainties

  • Zhang, Tao (Department of Advanced Systems Control Engineering, Graduate School of Science and Engineering, Saga University) ;
  • Nakamura, Masatoshi (Department of Advanced Systems Control Engineering, Graduate School of Science and Engineering, Saga University)
  • Published : 2001.12.01

Abstract

Uncertainties are the main reasons of deterioration of contour control of industrial articulated robot arm. In this paper, a high-precision contour control method was proposed to overcome some main uncertainties, such as torque saturation, system delay dynamics, interference between robot links, friction, and so on. Firstly, each considered factor of uncertainties was introduced briefly. Then proper realizable objective trajectory generation was presented to avoid torque saturation from objective trajectory. According to the model of industrial articulated robot arm, construction of Gaussian neural network controller with considering system delay dynamic, interference between robot links and friction was explained in detail. Finally, through the experiment and simulation, the effectiveness of proposed method was verified. Furthermore, based on the results it was shown that the Gaussian neural network controller can be also adapted for the various kinds of friction and high-speed motion of industrial articulated robot arm.

Keywords

References

  1. IEEE Trans. Man Mach. Syst. v.10 Resolved motion rate control of manipulators and human prostheses D. E. Whitney
  2. IEEE Trans. Syst.,Man, and Cyber. v.14 Approximate joint trajectories for control of industrial robots along Cartesian paths J. Y. S. Luh;C. S. Lin
  3. IEEE Trans. Automat. Cntr. v.31 Minimum-time control of robotic manipulators with geometric path constraints K. G. Shin;N. D. Mckay
  4. T.IEE Japan v.120-D no.5 A decoupring control method for industrial robots R. Nakashima;M. Ojima;R. Oguro;T. Tsuji
  5. Proceedings of IECON-2000 Feedforward compensator for control systems through pole assignment regulator S. Goto;M. Nakamura;M. Obata
  6. T.IEE Japan v.121-C no.1 Multidimensional modified taught data method for mechatronic servo systems: accurate contour control of articulated robot arms by considering interference of links M. Nakamura;M. Obata;S. Goto;N. Kyura
  7. Adaptive control of partially known system C. Canudas de Wit
  8. Control of machines with friction B. Armstrong
  9. Journal of Studies in Information and Control v.3 no.1 Model based compensation of friction in direct drive robotic arms M. R. Popovic;K. B. Shimoga;A. A. Goldenberg
  10. IEEE Trans. on Automatic Control v.40 no.3 A new model for control of systems with friction C. Canudas de Wit;H. Olsson(et al.)
  11. IEEE Trans. on Robotics and Automation v.5 no.4 Joint torque sensory feedback of a PUMA manipulator L. E. Pfeffer;O. Khatib;J. Hake
  12. IEEE Trans. on Robotics and Automation v.11 no.4 Design and development of high-performance torque-controlled joints D. Vischer;O. Khatib
  13. Automatica v.36 The precise control of manipulators with high joint-friction using base force/torque sensing G. Morel;K. Iagnemma;S. Dubowsky
  14. IEEE Trans. on Robotics and Automation v.15 Neural network output feedback control of robot manipulators Y. H. Kim;F. L. Lewis
  15. IEEE Trans. on Systems, Man, and Cybernetics v.30 A robust position/force learning controller of manipulators via nonlinear $H_{\infty}$ control and neural networks M. C. Hwang;X. H. Hu
  16. Proceedings of the sixth International Symbosium on Artificial Life and Robotics (AROB 6th'01) v.2 Neural-network controller for articulated robot arm with interference for high-precision contour control T. Zhang;M.Nakamura;S. Goto;N. Kyura
  17. Journal of the Japan Society for Precision Engineering v.64 Model construction and servo parameter determination of industrial mechatronic servo systems based on control performance J. Z. Zou;M. Nakamura;S. Goto;N. Kyura
  18. Proceedings of 3rd Asian Control Conference Feasible method of optimum control of industrial robot arms in operation under speed and torque constraints M. Nakamura;R. Munasinghe;S. Goto;N. Kyura
  19. Neural Networks v.4 A gaussian potential function network with hierarchically self-organizing learning S. Lee;R. M. Kil
  20. IEEE Trans. On Industrial Electronics v.43 Accurate contour control of mechatronic servo systems using gaussian networks S. Goto;M. Nakamura;N. Kyura
  21. Robotics: sensing, vision and intelligence K. S. Fu;R. C. Gonzalez;C. S. G. Lee
  22. Neural Networks 30 years of adaptive neural network: perceptron, madaline, and backpropagation B. Widrow;M. A. Lehr;C. Lau(ed.)
  23. IEEE/ASME Int. Conf., on Advanced Intelligeng Mechatronics (AIM) v.525B Modified taught data method for industrial mechatronic servo-controller to achieve accurate contour control performance S. Goto;M. Nakamura;N. Kyura