참고문헌
-
Elizabeth, R., etc. 'Machining with
$Al_2O_3$ -SiC-Whisker Cutting Tools,' Ceram. Bull., Vol. 67, No.6, pp. 1016-1019, 1988 - Whitney, E. D., Vaidyanathan, P. N., 'Microstructural Engineering of Ceramic Cutting Tools,' Ceram. Bull., Vol. 67, No.6, pp. 1010-1014, 1988
- Kerkwijk, B. J., Buizert, J.C., and Verweij, H., 'Tribological Tests Verify Wear resistance,' Am. Ceram. Soc. Bull., pp. 49-53, Vol. 79, No. 1, 2000
-
Szafran, M., Boyryk, E. D., Olszyna, K. A.,
$Si_3N_4-Al_2O_3-TiC-Y_2O_3$ composites intended for the edges of cutting tools,' Ceram. Inter., Vol. 26, pp. 579-582, 2000 https://doi.org/10.1016/S0272-8842(99)00098-X - Krell, A., Blank, P., Berger, L.-M., Richter, V., 'Alumina Tools for Machining Chilled Cast Iron, Hardened Steel,' Am. Ceram. Soc. Bull., Vol. 78, No. 12, pp. 65-73, 1999
- Bordue, D., 'Hard Part Machining with Ceramic Inserts,' Ceram. Bull., Vol. 67, No.6, pp. 998-1001, 1988
- Wayne, S. F., Buljan, S.-T., 'The Role of Thermal Shock on Tool Life of Selected Ceramic Cutting Tool Material,' J. Am. Ceram. Soc., Vol. 72, No.5, pp. 754-760, 1989 https://doi.org/10.1111/j.1151-2916.1989.tb06212.x
- Tonshoff, H. K., Bartsch, S., 'Wear Mechanism of Ceramic Cutting Tool,' Ceram. Bull., Vol. 67, No.6, pp. 1020-1025, 1988
- Kim, Y.-W., Mitomo, M., 'Fine-Grained Silicon Carbide ceramics with Oxynitride Glass,' J. Am. Ceram. Soc., Vol. 82, No. 10, pp. 2731-2736, 1999
-
Kim, Y.-W., Mitomo, M., Zhan, G. D., 'Mechanism of Grain Growth in Liquid-Phase-Sintered
${\beta}$ -SiC,' J. Mater. Res., Vol. 14, No. 11, pp. 4291-4293, 1999 https://doi.org/10.1557/JMR.1999.0581 - Kim, Y.-W., Lee, Y. I., Mitomo, M., 'Fabrication and Mechanical Properties of Silicon Carbide-Silicon Nitride Composites with Oxynitride Glass,' J. Am. Ceram. Soc., Vol. 82, No.4, pp. 1058-1060, 1999
- Cho, Duk-ho, Kim, Young-wook, Kim Wonjoong, 'Strength and fracture toughness of in situ-toughened silicon carbide,' J. Mater. Sci., Vol. 32, pp. 4777-4782, 1997 https://doi.org/10.1023/A:1018635131661