Journal of the Earthquake Engineering Society of Korea (한국지진공학회논문집)

Earthquake Engineering Society of Korea (한국지진공학회)
권호 표지

Dynamic Nonlinear Analysis of Stiffened Shell Structures

보강된 쉘구조의 동적 비선형해석

  • Published : 2001.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

For the dynamic nonlinear analysis of stiffened plate and shell structures, total Lagrangian formulation is presented based upon the degenerated shell element considering finite rotation effects. Assumed strain concept is adopted in order to overcome shear locking phenomena and to eliminate spurious zero energy mode. In the elasto-plastic analysis, the return mapping algorithm based on the consistent elasto-plastic tangent modulus is applied to collapse analysis of shell structures. Newmark integration method is used for dynamic nonlinear analysis of shell structures under dynamic forces.

보강된 판 및 쉘구조의 동적 비선형해석을 수행하기 위하여, 유한회전을 고려한 변형된 쉘유한요소를 이용하여 total Lagrangian formulation이 제시된다. 전단구속 (shear locking) 현상과 가상의 제로에너지 모우드를 동시에 제거하기 위하여 가정변형도 개념을 채용한다. 탄소성해석에서는 return mapping 미해rithm이 쉘구조의 붕괴 해석에 적용된다. Newmark 직접적분법을 사용하여 동하중 및 지진하중을 받는 쉘구조의 동적 비선형해석 결과를 제시한다.

Keywords

References

  1. Int. J. Numer. Methods Eng. v.2 Analysis of thick and thin shell structures by curved element Ahmad, S.;Irons, B.M.;Zienkiewicz, O.C.
  2. Nuclear Engineering Des. v.70 Derivation of element stiffness matrices by assumed strain distributions MacNeal, R.H.
  3. Int. J. Numer. Methods Eng. v.22 A new nine node degenerated shell element with enhanced membrane and shear interpolation Huang, H.C.;Hinton, E.
  4. Computers and Structures v.25 Implementation of assumed strain degenerated shell elements Huang, H.C.
  5. Int. J. Numer. Methods Eng. v.21 A four-node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation Bathe, K.J.;Dvorikin, E.N.
  6. Int. J. Numer. Methods Eng. v.36 Higher-order MITC general shell elements Bucalem, M.L.;Bathe, K.J.
  7. Finite Element Procedures in Engineering Analysis Bathe, K.J.
  8. Comp. Methods in Appl. Mech. and Engrg v.32 An excursion into large rotations Argyris, J.
  9. Int. J. Numer. Methods Eng. v.19 Geometrically nonlinear formulation for the curved shell elements Surana, K.S.
  10. Finite Element Software for Plates and Shells Hinton, E.;Owen, D.R.J.
  11. Int. J. Numer. Methods Eng. v.22 A return mapping algorithm for plane stress elastoplasticity Simo, J.C.;Taylor, R.L.
  12. Static and Dynamic Analyses of Plates and Shells Huang, H.C.
  13. Ph. D. Thesis Ultimate Strength Analysis of Stiffened Shell Structures Choi, M.S.