Abstract
The influence of thermal treatment and cold drawing was investigated for poly(ethy1ene terephthalate) films
fabricated with various experimental conditions. Samples were elongated at room temperature under stepwise-drawing
condition with the cross-head speed kom 0.5 to 500 mrdmin in an universal tester. Stress oscillation was observed in
the stress-stnin curve of the samples heat-treatd at 50, 72 and $129^{\circ}C$ for 30 min, but it was not observed in the samples
heat-treatd at $83^{\circ}C$ for 30 min. Thermal analyses of the samples were carried out in differential scanning calorimeter at
the heating rate df $10^{\circ}C$/min/min, and the glass transition temperature, crystallization peak, enthalpy of fusion and degree
of crystallinity were measured. The dynamic mechanical analyses of the samples were also carried out in a multiplefimction
internal kiction pendulum at 1 Hz with the heating rate of $1.5^{\circ}C$/min, and it was found that the elastic modulus
increases in the order of non-treated, heat-treated, and elongated samples.
여러 조건에서 제조된 poly(ethylene terephthalate) 필름 시편들로부터 열처리 및 냉연신 조건이 시편의 물성에 미치는 영향을 조사하였다. 상온에서 만능시험기을 사용하여 미열처리 및 열처리된 시편들을 0.5에서 500 mm/min의 cross-head 속도로 단계적 연신을 행한 결과, 약 50, 72 및 $129^{\circ}C$에서 열처리된 시편들의 응력-변형 곡선에서는 응력 진동이 발생되지만, 약 $83^{\circ}C$에서 30분 동안 열처리된 시편의 응력-변형 곡선에서는 응력 진동이 발생되지 않음을 알 수 있었다. 시차 주사 열량기를 사용하여 $10^{\circ}C$/min의 승온 속도에서 열분석을 행하였고, 시편들의 유리전이온도, 결정화 피크, 용융 잠열, 결정화도를 측정하였다. 1 Hz의 주파수대에서 $1.5^{\circ}C$/min의 승온 속도로 multiple-function internal friction pendulum으로 시편들의 동적 기계분석도 수행하였으며, 미열처리, 열처리 및 연신 시편들의 순서대로 탄성계수 값이 증가함을 알 수 있었다.