Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지

Etching Characteristics of $SrBi_{2}Ta_{2}O_{9}$ Thin Film with Adding $Cl_2$ into $CF_4$/Ar Plasma

$CF_4$/Ar 플라즈마 내 $Cl_2$첨가에 의한 $SrBi_{2}Ta_{2}O_{9}$ 박막의 식각 특성

  • Published : 2001.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

SrBi$_2$Ta$_2$$O_{9}$ thn films were etched in inductively coupled Cl$_2$/CF$_4$/Ar plasma. THe maximum etch rate was 1060 $\AA$/min at a Cl$_2$/(Cl$_2$+CF$_4$+Ar)=0.2. The 20% additive Cl$_2$ into CF$_4$/Ar plasma decreased carbon and fluorine radicals, but increased Cl radicals. Sr was effectively removed by reacting with Cl radical because the boiling point of SrCl$_2$(125$0^{\circ}C$) is lower than that of SrF$_2$(246$0^{\circ}C$). The chemical reactions on the etched surface were studied with x-ray photoelectron spectroscopy and secondary ion mass spectrometry. The etching profile was evaluated by using scanning electron microscopy.y.

Keywords

References

  1. 전자전기재료 v.13 no.4 FRAM소자의 제조 기술 현황 강남수
  2. J. Appl. Phys. v.36 no.10 Effects of oxide electrode on $PbZr_xTi_{1-x}/O_3$ thin films prepared by metalorganic chemical vapor deposition T. Y. Kim;D. S. Kim;C. W. Chung
  3. J. Appl. Phys. v.33 no.9B Fatigue characteristics of Sol-Gel derived Pb(Zr, Ti)O₃ thin films K. Amanuma;T. Hase;Y. Miyasaka
  4. J. Appl. Phys. v.37 no.10 Imprint of oriented Pb(Zr, Ti)O₃ thin films with oxygen atmosphere in cooling process H. S. Lee;K. H. Auh;M. S. Jeon;W. S. Um;I. S. Lee;G. P. Choi;H. G. Kim
  5. 전기전자재료학회논문지 v.11 no.3 MOD법에 의한 강유전성 $Sr_xBi_yTa_2O_{9+{\alpha}}/(SBT)$ 박막의 제조 및 후열처리 효과에 관한 연구 정병석;신동석;윤희성;김병호
  6. Appl. Phys. Lett. v.76 no.18 Impact of face-to-face annealing in preparation of sol-gel-derived $SrBi_2Ta_2O_9$ thin films K. Aizawa;E. Tokumitsu;K. Okamoto;H. Ishiwara
  7. Thin Solid Films v.375 Effect of excess bismuth on the microstructures and electrical properties of strontium bismuth tantalate SBT thin films A. Lia;D. Wu;H. Ling;T. Yu;M. Wang;X. Yin;Z. Liu;N. Ming
  8. J. Appl. Phys. v.38 no.9 A Study on a metal-ferroelectric-oxide-semiconductor structure with thin silicon oxide film using $SrBi_2Ta_2O_9$ ferroelectric films prepared by pulsed laser deposition M. Noda;H. Sugiyama;M. Okuyama
  9. J. Appl. Phys. v.39 no.9 Preparation of $SrBi_2Ta_{1.5}Nb_{0.5}O_{9}$ ferroelectric thin films by RF sputtering on large substrate T. Masuda;Y. Miyaguchi;K. Suu;S. Sun
  10. J. Eur. Ceram. Soc. v.19 Ferroelectric Strontium Bismuth Tantalate thin films deposited by metalorganic chemical vapour deposition(MOCVD) J. F. Roeder;B. C. Hendrix;F. Hintermaier;D. A. Desrochers;T. H. Baum;G. Bhandari;M. Chappuis;P. C. Van Buskirk;C. Dehm;E. Fritsch;N. Nagel;H. Wendt;H. Cerva;W. Honlein;C. Mazure
  11. Solid State Technol. v.41 Integrating ferroelectrics S. P. DeOrnellas;A. Cofer
  12. Appl. Phys. Lett. v.68 no.4 Reactive ion etching of ferroelectric $SrBi_2Ta_xNb_{2-x}O_9$ thin films S. B. Desu;W. Pan
  13. J. Vac. Sci. Technol. A v.18 no.4 Etching characteristics of $SrBi_2Ta_2O_9$ film with Ar CHF₃ plasma J. W. Seo;D. H. Lee;W. J. Lee;B. G. Yu;K. H. Hwon;G. Y. Yeom;E. G. Chang;C. I. Kim
  14. Thin Solid Films v.385 The etching characteristics of $SrBi_2Ta_2O_9$ thin film in CF₄/Ar plasma using plasma D. P. Kim;C. I. Kim
  15. 한국전자전기재료학회 추계학술대회 논문집 v.13 no.1 Ar/Cl₂ 식각 후 SBT 박막의 표면에 관한 연구 김동표;김창일;이원재;유병곤;김태형;장의구