References
- J. Am. Ceram. Soc. v.78 no.10 Microstructure, Flaw Tolerance, and Reliability of Ce-TZP and Y-TZP Ceramics M. J. Readey;C. L. McCallen
- J. Ceram. Soc. Jpn. v.105 no.1 R-Curve Determination of 3Y-PSZ by the Indentation Strength-in-Bending Method J.-F. Li;A. Kawasaki;R. Watanabe
-
J. Mater. Sci. Lett.
v.17
no.3
Low-temperature Phase Stability of Y₂O₃ and
$Nb_2O_5$ Co-doped TZP Ceramics D. Y. Lee;D. J. Kim;D. H. Cho -
Ceram. Intl.
v.24
no.6
Effect of
$Nb_2O_5$ and Y₂O₃ Alloying on the Mechanical Properties of TZP Ceramics D. Y. Lee;D. J. Kim;D. H. Cho;M. H. Lee -
Mater. Trans.
v.39
no.2
Mechanical Properties of Hot-pressed TZP Ceramics Doped with Y₂O₃ and
$Nb_2O_5$ D. Y. Lee;D. J. Kim;K. S. Cho - J. Am. Ceram. Soc. v.74 no.2 Effect of Dopants on Zirconia Stabilization-An X-ray Absorption Study: Ⅲ. Charge-compensating Dopants P. Li;I. Chen;J. E. Penner-Hahn
- Mater. Lett. v.39 no.4 Phase Stability of (Y,Nb)-TZP/Al₂O₃ Composites under Low Temperature Hydrothermal Conditions D. Y. Lee;D. J. Kim;J. W. Jang;D. W. Choi;S. J. Lee
- J. Biomed. Mater. Res.(Appl. Biomater) v.53 no.4 Mechanical Properties, Phase Stability, and Biocompatibility of (Y,Nb)-TZP/Al₂O₃ Composite Abutments for Dental Implant D. J. Kim;M. H. Lee;D. Y. Lee;J. S. Han
- J. Mater. Sci. Lett. v.19 no.14 Strength and Fracture Toughness of Isostatically Hot-pressed (Y,Nb)-TZP/Al₂O₃ Composites D. Y. Lee;D. J. Kim
- J. Mater. Sci. and Eng. A v.289 no.2 Chromaticity, Hydrothermal Stability, and Mechanical Properties of TZP Ceramics Doped wiith Yttrium, Niobium, and Ferric Oxides D. Y. Lee;D. J. Kim;Y. S. Song
- J. Am. Ceram. Soc. v.71 no.5 Rising Fracture Toughness from the Bending Strength of Indented Alumina Beams R. F. Krause, Jr.
- J. Am. Ceram. Soc. v.76 no.4 R-curve Behavior and Flaw Insensitivity of Ce-TZP/Al₂O₃ Composite N. Ramachandran;L. Y. Chao;D. K. Shetty
- ASTM Annual Book of Standards v.15.01 Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature American Society for Testing and Materials
-
J. Eur. Ceram. Soc.
Slow Crack Growth Behavior of Si₃N₄ with
$Yb_2Si_2O_7$ Tie-line Composition as Sintering Additives H. J. Choi;H. J. Kim;J. K. Lee;Y. W. Kim - ASTM Annual Book of Standards v.15.02 Biaxial Flexure Strength(Modulus of Rupture) of Ceramic Substrate American Society for Testing and Materials
- ASTM Annual Book of Standards v.11.03 Flexural Strength of Advanced Ceramics at Ambient Temperature American Society for Testing and Materials
- Quantitative Stereology E. E. Underwood
- J. Am. Ceram. Soc. v.64 no.9 A Critical Evaluation of Identation Techniques for Measuring Fracture Toughness: Ⅱ. Strength Method P. Chantikulp;G. R. Anstis;B. R. Lawn;D. B. Marshall
- Comm. Am. Ceram. Soc. v.65 A Simple Method for Determining Elastic-Modulus-to-Hardness Ratios using Knoop Indentation Measurements D. B. Marshall;T. Noma;A. G. Evans
- J. Mater. Sci. v.28 Processing and Properties of Y-TZP/Al₂O₃ Composites D. D. Upadhyaya;P. Y. Lalvi;G. K. Dey
- J. Mater. Sci. v.28 Mechanical Properties of Al₂O₃ Particle-Y-TZP Matrix Composite and its Toughening Mechanism J. L. Shi;B. S. Li;T. S. Yen
- J. Am. Ceram. Soc. v.78 no.4 Fracture Toughness of Al₂O₃ Particle-dispersed Y₂O₃-partially Stabilized Zirconia J. F. Li;R. Watanabe
- J. Am. Ceram. Soc. v.68 no.1 Strength and Fracture Toughness of Isostatically Hot-Pressed Composites of Al₂O₃ and Y₂O₃-Partially-Stabilized ZrO₂ K. Tsukuma;K. Ueda;M. Shimada
- J. Am. Ceram. Soc. v.99 no.2 Fabrication and Properties of (Y,Ce)-TZP/Al₂O₃Composites from Fine Powders Prepared by a Hydrolysis Technique M. Hirano;H. Inada
- J. Am. Ceram. Soc. v.68 no.2 High-temperature Strength and Fracture Toughness of Y₂O₃-Partially-Stabilized ZrO₂/Al₂O₃ Composites K. Tsukuma;K. Ueda;K. Matsushita;M. Shimada
- Acta Metall. v.31 no.4 Crack-Deflection Processes-Ⅰ. Theory K. T. Faber;A. G. Evans