The characteristics of MIS BST thin film capacitor

  • Park, Chi-Sun (Department of Electronic Engineering, Hanseo University) ;
  • Kim, In-Ki (Department of Materials Science & Engineering, Hanseo University)
  • 발행 : 2001.02.01

초록

Electric and dielectric(Ba,Sr)$TiO_3$[BST] thin films for emtal-Insulator-Semiconductor(MIS) capacitors have been studied. BST thin films wre deposted on p-Si(100) substrates bythe RF magnetron sputtering with tempratue range of 500~$600^{\circ}C$. The dielectric properties of MIS capacitors consisting of Al/BST/$SiO_2$/Si sandwich structure were evaluated ot redcue the leakage current density. The charge state densities of the MIS capacitors were determined by high frequency (1 MHz) C-V measurement. In order to reduce the leakage current in MIS capacitor, high quality $SiO_2$ layer was deposited on bare p-Si substrate. Depending on the oxygen pressure and substrate temperature both positive and negative polarities of effective oxide charge in the MIS capacitors were evaluated. It is considered that the density of electronic states, generated at the BST/$SiO_2$/p-Si interface due to the asymmetric structure within BST/$SiO_2$/Si structure, and the oxygen vacancy content has influence on the behavior of oxide charge.

키워드

참고문헌

  1. Jpn. J. Appl. Phys. v.31 no.3025 T. Kuroiwa;T. Honda
  2. IEEE Int. Electron Device v.39 no.9 R. Moazzami;C. Hu;W.h. Shepherd
  3. IEDM, Tech, Dig. v.631 T. Eimori;Y. Ohno;H. Kimura;J. Matsuhusa;S. Kinshimura;A. Yoshida;H. Sumitani;T. Maruyama
  4. Symp. on VLSI, Tech. Dig. v.149 Y. Ohno;T. Horikawa;H. Shinkawata;K. Kashihara
  5. Jpn. J. Appl. Phys. v.77 no.5231 K. Abe;S. Komatsu
  6. Tech. Dig. IEEE Int. Electron Device Meet v.267 E. Fujii;Y. Uemoto;S. Hayashi;T. Nasu;Y. Shimada;A. Matsuda;M. Kibe;M. Azuma;T. Otsuki;G. Ano;M. Scott;L. D. McMillan;C. A. Paz de Araujo
  7. Jpn. J. Appl. Phys. v.33 no.5297 K. Abe;S. Komatsu
  8. Jpn. J. Appl. Phys. v.33 no.5231 P. Bhattacharya;K. Park;Y. Nishioka
  9. Jpn. J. Appl. Phys. v.32 no.4126 T. Horikawa;N. Mikami;T. Makita;J. Tanimura;M. Kataoka;K. Sato;M. Nunoshita