Increase of cell-gap tolerance for LC panels used in LC projectors by introducing slit patterns in pixel electrodes

빗살무늬 화소전극으로 액정토영기에 쓰이는 액정판의 허용공치를 키우는 방법

  • Published : 2001.08.01

Abstract

The quality of images displayed by using an LC projector is strongly influenced by the cell-gap variations over LC panels, the essential components of the projector. We show that such influence can be relieved by introducing slit patterns in the pixel electrodes in the LC panels. The improvement comes from the compensation of the influence of cell-gap variations by optical anisotropy variations arising from the lateral components of the electric field generated by the slit patterned electrodes. Simulations show that cell-gap tolerance can be increased by more than 50% by introducing the slit patterns. This method can be used in TN mode LC panels, which use LC's with positive dielectric anisotropy. tropy.

액정투영기(LCD Projector)의 핵심 구성요소인 액정판에서 액정층의 두께 변화는 광투과도를 변화시켜 화질을 크게 떨어뜨리는 중요한 변수이다. 이 논문에서는 액정판의 화소전극에 빗살무늬를 만들면 액정층의 두께변화를 광학이방성의 변화가 보상하여 계조별 광투과도의 변화를 줄일수 있음을 보였다. 전산시늉의 결과는 현재의 액정판에 비해 액정층 두께변화의 허용공차를 50% 이상키울수 있음을 보여준다. 이 방식은 TN 모우드와 같이 유전률 이방성이 양성인 액정을 쓰는 경우에 적용할 수 있다.

Keywords

References

  1. FLAT PANEL DISPLAY 2001 日本經濟出版社 편집부
  2. LCD ENGINEERING 노봉규(외)
  3. Proc. IDW'00 The optical performance of liquid crystal under cell gap variations in the projection display system G. S. Ho;C. R. Ou;C. J. Yoo
  4. SID'96 Digest Development of simple process to fabricate high-quality TFT-LCDs N. Koma;R. Nishikawa
  5. Proc. Asia Display'98 Wide viewing angle TFT-LCD based on ridge and fringe-field multi-dimain homeotropic structure A. Lien(et al.)
  6. Proc. IDW'99 A new wide-viewing-angle VA-mode LCD with a simpler cell fabrication process Bong Gyu Rho(et al.)
  7. 대한민국 특허출원 액정표시소자 노봉규
  8. 대한민국 특허출원 액정셀의 두께 공차가 큰 고 해상도 액정표시소자 노봉규
  9. 대한민국 특허출원 미세렌즈가 부착된 액정표시소자 노봉규