Journal of Mechanical Science and Technology

  • 제15권9호
  • /
  • Pages.1311-1318
  • /
  • 2001
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

The 2D Measurement of Soot Diameter and Number Density in a Diesel Engine Using Laser Induced Methods

  • Lee, Myung-Jun (Department of Automotive Engineering, Yangsan College) ;
  • Yeom, Jung-Kuk (School of Mechanical & Aerospace Engineering, Seoul National University) ;
  • Ha, Jong-Yul (Department of Mechanical Engineering, Donga University) ;
  • Chung, Sung-Sik (Department of Mechanical Engineering, Donga University)
  • 발행 : 2001.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

It is necessary to diagnose accurately the characteristics of soot formation and oxidation in a diesel engine. Whereas past measurement techniques for soot concentration give limited information for soot, laser-based two-dimensional imaging diagnostics have a potential to provide temporally and spatially superior resolved measurements of the soot distribution. The technique using laser sheet beam has been applied to an optically accessible diesel engine for the quantitative measurement of soot. The results provided the information for reduction of soot from the diesel engine. Both LIS (Laser Induced Scattering) and LII (Laser Induced Incandescence) techniques were used simultaneously in this study. The images of LIS and LII showed the quantitative distribution of the soot concentration in the diesel engine. In this study, several results were obtained by the simultaneous measurements of LIS and LII technique. The diameter and number density of soot in combustion chamber of the test engine were obtained from ATDC 20 degree to 110 degree. The soot diameter increased about 37% between ATDC 20 degree and 110 degree. The number density of soot, however, decreased significantly between ATDC 40 degree and 70 degree.

키워드

참고문헌

  1. Dec, J. E., Loye, A. O. zur Siebers, D. L., 1991, 'Soot Distribution ina D. I. Diesel Engine Using 2-D Laser-Induced Incandescence Imaging, SAE Paper No. 910224, pp. 277-288.
  2. Dec, J. E., 1992, 'Soot Distribution in a DI Diesel Engine Using 2-D Imaging of Laser-Induced Incandescence, Elastic Scattering, and Flame Luminosity,' SAE Paper, No. 920115, pp. 101-112.
  3. Dec, J. E., 1997, 'A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging,' SAE Paper, No. 970873.
  4. Kosaka, H., Nishigak, T., Kamimoto, T. and Harada, S., 1995, 'A Study on Soot Formation and Oxidation in an Unsteady Spray Flame via Laser Induced Incandescence and Scattering Techniques,' SAE paper, No. 952451, pp. 11-20.
  5. Loye, A. O. zur, Siebers, D. L. and Dec, J. E., 1990, '2-D Soot Imaging in a Direct Injection Diesel Engine Using Laser-Induced Incandescence,' International Symposium CO-MODIA 90, pp. 523-528.
  6. Melton, L. A., 1984, 'Soot Diagnostics Based on Laser Heating,' Applied Optics, Vol. 23, No. 13, pp. 2201-2208.
  7. Ni, T. pinson, J. A. Gupta, S., and Santoro, R. J., 1995, 'Two-Dimensional Imaging of Soot Volume Fraction by the Use of Laser-Induced Incandescence,' Applied Optics, Vol. 34, No. 30, pp. 7083-7091.
  8. Pinson, J. A., Mitchell, D. L., Snatoro, R. J.and Litzinger, T. A., 1993, 'Quantitative Planar Soot Measurements in a D. I. Diesel Engine Using Laser-Induced Incandescence and Light Scattering,' SAE Paper, No. 932650.
  9. Shioji, M., Ito, S., Yamane, and IKegami, M., 1995, 'A Study of Diesel Combustion and Soot Formation as Observed by High-Speed Photography.' JSME(B), Vol. 61, 581, pp. 344-350.
  10. Won, Y. H., Kamimoto T. and Kosaka, H., 1992, 'A Study Formation in Unsteady Spray Flams via 2-D Soot Imaging,' SAE Paper, No. 920114, pp. 89-100.