References
- Barber, J.R., 1967, 'The Influence of Thermal Expansion on the Friction and Wear Process,' Wear, Vol. 10, pp. 155-159 https://doi.org/10.1016/0043-1648(67)90087-7
- Cho, C., 1997, 'Design Factors of Automotive Brakes,' KSME Trans., Vol. 37, No.7, pp. 49-57 (in Korean)
- Cho, C. and Ahn, S., 2000, 'Surface Temperature in Sliding Systems Using the FFT Finite Element Analysis,' J. KSTLE, Vol. 16, No.3, 218 -222 (in Korean)
- Dow, T.A. and Burton, R.A., 1972, 'Thermoelastic Instability of Sliding Contact in the Absence of Wear,' Wear, Vol. 19, pp. 315-328 https://doi.org/10.1016/0043-1648(72)90123-8
- Earles, S.W. E. and Soar, G.B., 1971, 'Squeal Noise in Disc Brakes,' Proc. Instn. Mech. Engrs., pp. 61-69
- Floquet, A. and Dubourg, M.C., 1994, 'Non-axisymmetric Effects for Three Dimensional Analysis of a Brake,' ASME Journal of Tribology, Vol. 116, pp. 401-407
- Guan, D. and Jiang, D., 1998, 'A Study on Disc Brake Squeal using Finite Element Methods.' Proc. Society of Automotive Engineers, Paper No. 980597, pp, 157-161
- Hills, D.A. and Barber, J.R., 1985, 'Steady Motion of an Insulation Rigid Flat-Ended Punch over a Thermally Conducting Half-Plane,' Wear, Vol. 102, pp. 15-22 https://doi.org/10.1016/0043-1648(85)90087-0
- Kim, J. and Cho, C., 1999, 'A Study on Automotive Disc Brake Squeal Noise,' Proc. 99 KSPE Spring Conference, pp, 684-688(in Korean)
- Korea Research Institute of Standards and Science (KRISS), 1985, Temperature Measurements using Thermocouples
- Lee, K. and Barber, J.R., 1993, 'Frictionally-Excited Thermoelastic Instability in Automotive Disk Brakes,' ASME Journal of Tribology, Vol. 115, pp. 607-614
- Lee, K. and Barber, J.R., 1994, 'An Experimental Investigation of Frictionally-Excited Thermoelastic Instability in Automotive Disk Brakes Under a Drag Brake Application,' ASME Journal of Tribology, Vol. 116, pp. 409-414
- Matsui, H., Murakami, H., Nakanishi, H., and Tsuda, Y., 1992, 'Analysis of Disc Brake Squeal,' Proc. Society of Automotive Engineers, Paper No. 920553, pp. 15-24
- Matsushima, T. and Kikuchi, N., 1995, 'Study of Disc Brake Squeal Analyzed by Lubrication Theory,' Proc. Society of Automotive Engineers, Paper No. 9531651, pp. 395-400
- Nishiwaki, M., 1993, 'Generalized Theory of Brake Noise,' Proc. Instn. Mech. Engrs., Vol. 207, pp. 195-202
- SAE Standard, 1993, 'Brake Performance and Wear Test Code Commercial Vehicle Inertia Dynamometer' (SAE J2115)