Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on an Atomization Model of a High-Pressurized Liquid Jet with a Stability Theory

안정성 이론을 이용한 고압 분사 액체 제트의 미립화 모델에 관한 연구

  • Published : 2001.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The wave characteristics for a non-reacting high-speed liquid jet were investigated using a linear stability theory. In this study, 2-D incompressible viscid momentum equation for a liquid jet was considered, and the effects of injection parameters, such as Weber number, Reynolds number, and density ratio, on the wave characteristics were investigated. With the wavelength obtained from the stability analysis, the atomization model was suggested. The droplet sizes after breakup were determined by the wavelengths of fast growing waves, and the mass of the shed droplets was determined by the breakup time derived by ORouke et al. It was found that in comparison with measurements of diesel fuel spray, the results of calculation had a similar trend of the decrease of overall SMD with the increase of Reynolds number.

Keywords

References

  1. Rayleigh L., 1878 'On the Instability of Jets,' Proc. Lond. Math. Soc. 10 https://doi.org/10.1112/plms/s1-10.1.4
  2. Lin S. P., and Ibrahim E. A., 1990, 'Instability of a Viscous Liquid Jet Surrounded by a viscous Gas in a Vertical Pipe,' J. Fluid Mech., Vol. 218, pp. 614-658 https://doi.org/10.1017/S002211209000115X
  3. Ibrahim E. A., and Marshall S. O., 2000, 'Instability of a Liquid Jet of Parabolic Velocity Profile,' Chemical Engineering Journal, vol. 76, pp. 17-21 https://doi.org/10.1016/S1385-8947(99)00110-2
  4. O'Rouke P. J., and Amsden A. A., 1987, 'The Tab Method for Numerical Calculation of Spray Droplet Breakup,' SAE paper No. 872089
  5. Reitz R. D., and Diwakar, R., 1987, 'Structure of High-Pressure Fuel Sprays,' SAE paper No. 870598
  6. Huh K. Y., and Gosman A. D., 1991, 'A Phenomenological Model of Diesel Spray Atomization,' Proceeding of the International Conference on Multiphase Flows, Japan
  7. 김홍석, 성낙원, 1999, '디젤 엔진 분무의 액적미립화 모델 및 벽면 충돌 모델에 관한 연구,' 대한기계학회논문집 B 권, 제 23 권 제 1 호, pp. 69-81
  8. Dombrowski N., and Johns W. R., 1963, 'The Aerodynamic Instability and Disintegration of Viscous Liquid Sheet,' Chem. Eng. Sci. 18, pp 203-214
  9. Amsden A. A., 1997, 'KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves,' Los Alamos National Laboratory report LA-13313-MS (July)
  10. Tomohisa D., Takagishi S., Senda J., and Fujimoto, H., 1997, 'Effect of Ambient Gas Properties for Characteristics of Non-Reacting Diesel Fuel Spray,' SAE paper No. 970352
  11. Allocca L., Corcione F. E., and Fusco A., 1994 'Modeling of Diesel Spray Dynamics and Comparison with Experiments,' SAE paper No. 941895
  12. Yamane Y., Yokota H., and Kamimoto T., 1992, 'Study of Atomization and Air-Entrainment Characteristics of Unsteady Dense Sprays,' Trans. Of JSME (B), Vol. 58 No.550, pp.1955-1960
  13. Hiroyasu H., and Arai M., 1980, 'Fuel Spray Penetration and Spray Angle in Diesel Engines,' Journal of JSAE, No. 21, pp. 5-11