Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Application of the Leak Before Break(LBB) Concept to a Heat Exchanger in a Nuclear Power Plant

  • Kwon, Jae-Do (School of Mechanical Engineering, Yeungnam University) ;
  • Lee, Choon-Yeol (School of Mechanical Engineering, Yeungnam University) ;
  • Lee, Yong-Son (School of Mechanical Engineering, Yeungnam University) ;
  • Sul, Il-Chan (School of Mechanical Engineering, Yeungnam University)
  • Published : 2001.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

The leak before break(LBB) concept is difficult to apply to a structure with a thin tube that is immersed in a water environment. A heat exchanger in a nuclear power plant is such a structure. The present paper addresses an application of the LBB concept to a heat exchanger in a nuclear power plant. The minimum leaked coolant amount(approximately 37.9 liters) containing the radioactive material which can activate the radiation detector device installed in near the heat exchanger is assumed. A postulated initial flaw size that can not grow to a critical flaw size within the time period to activate the radiation detector is justified. In this case, the radiation detector can activate the warning signal caused by coolant leakage from initially postulated flaws of the heat exchanger. The nuclear plant can safely shutdown when this occurs. Since the postulated initial flaw size can not grow to the critical flaw size, the structural integrity of the heat exchanger is not impeded. Particularly the informational scenario presented in this paper discusses an actual nuclear plant.

Keywords

References

  1. Bamford, W. H., 1979, 'Fatigue Crack Growth of Stainless Steel Piping in a Pressurized Water Reactor Environment,' Trans. ASME J. of Pressure Vessel Technology, Vol. 101., No. 5, p. 381
  2. Bamford, W. H. and Landerman, E. I., 1983, 'Thermal Analysis of Cast Stainless Steel and Its Impact on Piping Intergrity,' PVP, Vol. 95, p. 143
  3. Giancoli, C. D., 1995, Physics Principles with Application, Prentice-Hall International, Inc. , New Jersey, pp. 1062-1065
  4. Kanninen, M. F., et al., 1976, 'Mechanical Fracture Prediction for Sensitized Stainless Steel Piping with Circumferentical Cracks,' EPRI NP-192
  5. 'Original-Pipe Crack Evaluation Program,' 1993, Prepared by EPRI, Palo Alto, Calif., NP-3596-SR, Picep-Rev. 4.
  6. Paris, P. C. and Tada, H., 1983, 'The Application of Fracture Proof Design Methods Using Tearing Instability Theory to Nuclear Piping Postulating Circumferential Through Wall Cracks,' NUREG/CR-3464
  7. 'Structural Alloys Hand Book,' 1974, Stainless 304, p. 61
  8. US Federal Register, 1986, Vol. 51, No. 70, 12502
  9. US Federal Register, 1987, Vol. 52, No. 207, 41288