참고문헌
- Keeler, S. P. and Back, W. A., 1963, 'Plastic Instability and Fracture in Sheets Stretched over Rigid Punches,' ASM Transactions Quarterly, 1963, pp. 25-48
- Goodwin, G. M., 1968, 'Application of Strain Analysis to Sheet Metal Forming Problems in the Press Shop,' Transactions Society of Automotive Engineering, No. 680093. pp. 380-387
- 김영석, 1993, '판재의 성형성평가 실험에 대한 고찰,' 대한기계학회지, 제33권, 제1호(통권 제146호), pp. 47-65
- Kleemola, H. J. and Pelkkikangas, M. T., 1977, 'Effect of Predeformation and Strain Path on Forming Limits of Steel Copper and Brass,' Sheet Metal Industries, pp. 591-599
- 양동렬, 1984, '금속성형 의 기초 와 응용 I,' 대한기계학회지, 제24권, 제2호(통권 제84호), pp. 83-91
- Stoughton., T. B., 2000, 'A General Forming Limit Criterion for Sheet Metal Forming, International Journal of Mechanical Sciences, Vol. 42, pp. 1-27 https://doi.org/10.1016/S0020-7403(98)00113-1
- Nam, J. B., Park, K. C. and Jeong, K. J., 1997, 'Determination of Forming Limit Curves of Steel Sheets with Considering the Effect of Strain-Path Changes,' Journal of the Korean Society for Technology of Plasticity, Vol. 6, No. 1, pp. 36 -45
- Hosford, W. F., 1979, 'On Yield Loci of Anisotropic Cubic Metals,' Proc. 7th NAMRC, SME, Dearborn, Michigan, pp 191-196
- Hill, R., 1948, 'A Theory of the Yielding and Plastic Flow of Anisotropic Metals,' Proceedings of the Royal Society of London, pp. 281-297
- Graf, A. F., and Hosford, W. F., 1993, 'Calculations of Forming Limit Diagram for Changing Strain Paths,' Metallurgical Transactions A, Vol. 24A, pp. 2497-2501 https://doi.org/10.1007/BF02646528
- Arrieux, R., 1997, 'Determination and Use of the Forming Limit Stress Surface of Orthotropic Sheets,' Journal of Materials Processing Technology, Vol. 64, pp. 25-32 https://doi.org/10.1016/S0924-0136(96)02550-2
- Vacher, P., Arrieux, R. and Tabourot, L., 1998, 'Analysis of a Criterion of Deep Drawing Operation Capability for Thin Orthotropic Sheets,' Journal of Materials Processing Technology, Vol. 78, pp. 190-197 https://doi.org/10.1016/S0924-0136(97)00486-X