참고문헌
- Park, W. J., 1982, 'An Optimal Design of Simple Symmetric Laminates Under the First Ply Failure Criterion,' J. Compos. Mater., Vol. 16, pp. 341-355 https://doi.org/10.1177/002199838201600407
- Kim, C. W., Hwang, W., Park, H. C., and Han, K. S., 1997, 'Stacking Sequence Optimization of Laminated Plates,' Compos. Struct., Vol. 39, pp. 283-288 https://doi.org/10.1016/S0263-8223(97)00120-7
- Tauchert, T. R., and Adibhatla, S., 1984, 'Design of Laminated Plates for Maximum Stiffness,' J. Compos. Mater., Vol. 18, pp. 58-69 https://doi.org/10.1177/002199838401800105
- Kam, T. Y., and Chang, R. R., 1992, 'Optimum Layup of Thick Laminated Composite Plates for Maximum Stiffness,' Eng. Opt., Vol. 19, pp. 237-249 https://doi.org/10.1080/03052159208941230
- Kam, T. Y., and Lai, M. D., 1989, 'Multilevel Optimal Design of Laminated Composite Plate Structures,' Comput. Struct., Vol. 31, pp. 197-202 https://doi.org/10.1016/0045-7949(89)90225-3
- Franco Correia, V. M., Mota Soares, C. M., and Mota Soares, C. A., 1997, 'Higher Order Models on the Eigenfrequency Analysis and Optimal Design of Laminated Composite Structures,' Compos. Stuct., Vol. 39, pp. 237-253 https://doi.org/10.1016/S0263-8223(97)00118-9
- Mota Soares, C. M., Mota Soares, C. A., and Franco Correia, V. M., 1997, 'Optimization of Multilaminated Structures Using Higher-Order Deformation Models,' Comput. Methods Appl. Mech. Engng., Vol. 149, pp. 133-152 https://doi.org/10.1016/S0045-7825(97)00066-2
- Haftka, R. T., and Walsh, J. L., 1992, 'Stacking-Sequence Optimization for Bucking of Laminated Plates by Integer Programming,' AIAA J., Vol. 30, pp. 814-819
- Adali, S., Richter, A., and Verijenko, V. E., 1997, 'Optimization of Shear-Deformable Laminated Plates Under Bucking and Strength Criteria,' Compos. Struct., Vol. 39, pp. 167-178 https://doi.org/10.1016/S0263-8223(97)00111-6
- Riche, R. L., and Haftka, R. T., 1993, 'Optimization of Laminated Stacking Sequence for Bucking Load Maximization by Genetic Algorithm,' AIAA J., Vol. 31, pp. 951-956
- Sivakumar, K., Iyenger, N. G. R., and Kalyanmoy Deb, 1998, 'Optimum Design of Laminated Composite Plates with Cutouts Using a Genetic Algorithm,' Comput. Struct., Vol. 42, pp. 265-279 https://doi.org/10.1016/S0263-8223(98)00072-5
- Winston, W. L., Introduction to Mathematical Programming, Duxbury Press, California, 1995
- Hajela P., and Shii, C. J., 1989, 'Optimal Design of Laminated Composites Using A Modified Mixed Integer and Discrete Programming Algorithm,' Comput. Struct., Vol. 32, pp. 213-221 https://doi.org/10.1016/0045-7949(89)90087-4
- Ben-Haim, Y. and Elishakoff, I., 1990, Convex Models of Uncertainty in Applied Mechanics, Elsevier, Amsterdam
- Givoli, D., and Elishakoff, I., 1992, 'Stress Concentration at a Nearly Circular Hole with Uncertain Irregularties,' J. Appl. Mech., Vol. 59, pp. 65-71
- Elishakoff, I., and Colombi, P., 1993, 'Combination of Probabilistic and Convex Models of Uncertainty When Scarce Knowledge Is Present an Acoustic Excitation Parameters,' Comput. Methods Appl. Mech. Engng., Vol. 104, pp. 187-209 https://doi.org/10.1016/0045-7825(93)90197-6
- Ben-Haim, 1993, 'Failure of an Axially Compressed Beam with Uncertain Initial Deflection of Bounded Strain Energy,' Int. J. Engng. Sci., Vol. 31, pp. 989-1001 https://doi.org/10.1016/0020-7225(93)90107-6
- Elishakoff, I., 1994, 'A Deterministic Method to Predict the Effects of Unknown-but-Bounded Elastic Moduli on the Buckling of Composite Structures,' Comput. Methods Appl. Mech. Engng., Vol. 111, pp. 155-167 https://doi.org/10.1016/0045-7825(94)90043-4
- Jones, R. M., Mechanics of Composite Materials, McGraw-Hill, ToKyo, 1975
- Vanderplaats, G. N., Numerical Optimization Techniques for Engineering Design, McGraw-Hill, New York, 1984
- Reddy, J. N., 1984, 'A Simple Higher-Order Theory for Laminated Composite Plates,' J. Appl. Mech., Vol. 51, pp. 745-752