Korean Journal of Air-Conditioning and Refrigeration Engineering (설비공학논문집)

The Society of Air-Conditioning and Refrigerating Engineers of Korea (대한설비공학회)
권호 표지

The Study about Cooling Effect of a Heated module in a Horizontal Channel with a Variation of Channel Height

수평채널 밑면에 부착된 단일 발열모듈에서 채널높이의 변화에 따른 냉각특성 연구

  • Published : 2001.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The coupled conduction and convection heat transfer from a protruding heated module in a horizontal channel with a variation of channel height is experimentally investigated. The input power to the module is 3, 7W and thermal resistance of module support is 0.06 , 1.03 and 158K/W. the Reynolds number ranged from 350 to 4500 corresponding to the inlet velocity(0.4~1.3 m/s) and channel height(11~35 mm). The results were obtained that the decrease of thermal resistance of module support reduces the module temperature by redistributing the heat flux and the overall thermal resistance of the module. In the study the effect of channel height is very significant in the adiabatic condition, but negligible in the conjugate condition. Finally, correlations for Nusselt number and $Q_B$/Q with a variation of Reynolds number were developed respectively.

Keywords

References

  1. Cooling Technology for Electric Equipment Analytical correlation of thermal design of electronic packages Graham, K.;Witzman S.
  2. Journal of Heat Transfer v.116 Turbulent heat transfer between a series of parallel plated with surface-mounted discrete heat sources Kim, S. H.;Anand, N. K.
  3. Trans. of the Japan Society of Mechanical Engineers v.61 no.583 Conjugate-mode heat transfer from a module on the base of a parallel-plate channel to forced convective air flow(experimental determination of macroscopic thermal conductance) Park,S.H.;Nakayama,W.
  4. Journal of Heat Transfer v.118 Conjugate heat transfer from a single surface mounted block to forced convective air flow in a channel Nakayama,W.;Park,S.H.
  5. Journal of Heat Transfer v.38 no.16 A numerical investigation of conjugate heat transfer from a flush heat source on a conductive board in laminar chnnel flow Sugavanam,R.;Ortega,A.;Choi,C.Y.
  6. Transactions on Components. Packaging. and Manufacturing Technology v.18 no.1 A boundary element formulation of the conjugate heat transfer from a convectively cooled discrete heat source mounted on a conductive substrate Kabir, H.;Ortega, A.;Chan, C. L.
  7. Trans. KSME(B) v.20 no.2 Conjugate Heat Transfer in a Vertical Channel with Protruding Heat Source Kim, E. K.;Baek, B. J.;Pak, B. C.;Cho, B. S.
  8. Proceeding of the KSME Spring Annual Meeting Conjugate Heat Transfer from a Surface Mounted Module to Mixed-Convective Air Flow in a Channel Floor Riu,K.J.;Lee,J.H.;Park,S.H.
  9. Proceeding of the KSME Fall Annual Meeting Conjugate Mode Heat Transfer to Mixed Convective Air Flow From a Square Module Mounted on a Conductive Board Park,S.H.;Lee,J.H.;Riu,K.J.
  10. Trans. of KSME(B) v.23 no.1 Analysis of Three-Dimensional Mixed Convection Flow About Uniformly Distributed Heat Generating Blocks on a Conductive Wall Yun,B.T.;Choi,D.H.
  11. Korean Journal of Air-Conditioning and Refrigeration Engineering v.11 no.1 Experimental study on characteristics of two-phases flow through a bypass-orifice expansion device Choi, J. M.;Kim, Y. C.
  12. Proceedings of the SAREK 2000 Summer Annual Conference(Ⅰ) Cooling Effect of a module in a Horizontal Channel with a Variation of Thermal Resistance and Material of board Lee,J.H.;Riu,K.J.;Lee,B.H.