References
- 홍진우, 오후규, 1999, '세관내 대체냉매의 응축 열전달 특성,' 공기조화.냉동공학회 학회지, Vol. 28, No. 5, pp. 396-402
- Soliman, H.M, 1982, 'On the Annular-to -wavy Flow Pattern Transition During Condensation Inside Horizontal Tubes,' Canadian J. Chemical Engineering 60, pp. 475-481
- Traviss, D.P., Rohsenow, W.M., 1973, 'Flow Regimes in Horizontal Two-Phase Flow with Condensation,' ASHRAE Tran. 79, pp. 31-39
- Dobson, M.K., Chato, J.C., Hinde, D.K. and Wang, S.P., 1994, 'Experimental Evaluation of Internal Condensation of Refrigerations R-12 and R-134a,' ASHRAE Tran. No-94-5-3, pp. 744-754
- Shah, M.M, 1979, 'A General Correlation for Heat Transfer During Film Condensation Inside Pipes,' Int. J. Heat and Mass Transfer, Vol. 22, pp. 547-556 https://doi.org/10.1016/0017-9310(79)90058-9
- Traviss, D.P., Rohsenow, W.M., Baron, A.B., 1973, 'Forced Convective Condensation in Tubes : A Heat Transfer Correlation for Condenser Design,' ASHRAE Tran. 79(1), pp. 157-165
- Cavallini, A. and Zechin, R., 1974, 'A Dimensionless Correlation for Heat Transfer in Forced Convective Condensation,' Proceedings of the Fith International Heat Transfer Conference 3, pp. 309-313
- Baird, J. R., Haynes, B. S., 1998, 'Development of a New Method to Study Condensation Heat Transfer in Fine Passages,' Proceedings of 11th IHTC. Vol. 6, pp. 341-346
- Webb, R. L., Zhang, M. and Narayanamurthy, R. 1998, 'Condensation Heat Transfer in Small Diameter Tubes,' Proceedings of 11th IHTC. Vol. 6, pp. 403-408
- Gallagher, J., McLinden, M., Morrison, G., and Huber, M., 1996, NIST Thermodynamic Properties and Refrigerant Mixtures Database (REFROP), Version 5.0, National Institute of Standards and Technology, Gaithersburg, MD, U.S.A.
- Kline, S. J. and MeClintock, F. A., 1953, 'The Description of Uncertainties in single Sample Experiments,' Mech. Eng., Vol. 75, pp. 8-9
- Yang, C.-Y. and Webb, R.L., 1996, 'Friction Pressure Drop of R-12 in Small Hydraulic Diameter Extruded Aluminum Tubes with and without Micro-Fins,' Int. J. Heat and Mass Transfer, Vol. 39, No. 4, pp. 801-809 https://doi.org/10.1016/0017-9310(95)00151-4
- Mishima, K. and Hibiki, T., 1996, 'Some Characteristics of Air-Water Two-Phase Flow in Small Diameter Vertical Tubes,' Int. J. Multiphase flow, Vol. 22, No. 4, pp. 703-712 https://doi.org/10.1016/0301-9322(96)00010-9
- Wilmarth, T. and Ishii, M., 1994, 'Two-Phase Flow Regimes in Narrow Rectangular Vertical and Horizontal Channels,' Int. J. Heat and Mass Transfer, Vol. 37, No. 12, pp. 1749-1758 https://doi.org/10.1016/0017-9310(94)90064-7
- Fujita, H., Ohara, T., Hirota, M. and Furuta, H., 1995, 'Gas-Liquid Floes in Flat Channels with Small Channel Clearance,' Proceedings of The 2nd International Conference on Multiphase Flow '95-Kyoto, IA3-37-44
- 오후규, 노건상, 김성규, 1993, '대체냉매 R-134a의 수평관내 증발 열전달에 관한 연구,' 냉동.공조공학회지, Vol. 12, No. 4, pp. 235-246
- 이동익, 1992, '대체냉매 R-134a를 이용한 수평이중관형 열교환기의 응축전열특성에 관한 연구,' 부산수산대 석사학위논문, pp. 18-52
- Dittus, F.W. and Boelter, L.M., 1930, 'Heat Transfer in Automobile Radiators of Tubular Type,' University of California at Berkeley, Public Engineering, Vol. 2, p. 443
- 오종택, 飛原 英治, 2000, 'HFC 순수냉매 및 3성분 혼합냉매의 수평관내 응축열전달,' 대한기계학회논문집 B권, 제24권 제2호, pp. 233-240
- Oh, H.-K., Katsuta, M. and Shibata, K. 1998, 'Heat Transfer Characteristics of R-134a in a Capillary Tube Heat Exchanger,' Proceedings of 11th IHTC. Vol. 6, pp. 131-136
- 김정오, 조진표, 김내현, 2000, '알루미늄 다체널 평판관내 R-22 응축에 관한 연구,' 대한기계학회논문집 B권, 제24권, 제2호, pp. 241-250
- 홍진우, 이호림, 김기수, 노건상, 오후규, 1999, '소구경관내 R-22와 R-134a이 응축 전열 특성에 관한 연구,' 대한기계학회 열공학부문, '99 추계학술대회 논문집, pp. 685-690
- 김종수, 勝田 正文, 1995, '멀티 패스 R-134a의 응축 열전달율 및 압력 손실,' 냉동.공조공학 제14권 제5호, pp. 273-283
- 전창덕, 정재원, 이진호, 1999, '자동차용 다채널관의 응축 열전달에 관한 연구,' 대한기계학회논문집 B권, 제23권, 제4호, pp. 479-491