Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Collapse Characteristics on Width Ratio and Flange Spot-Weld Pitch for Hat-Shaped Members

모자형 단면부재의 폭비와 플랜지 용접간격에 따른 압궤특성

  • Cha, Cheon-Seok (Dept.of Mechanical Design Engineering, Graduate School of Chosun University) ;
  • Gang, Jong-Yeop (Dept.of Mechanical Design Engineering, Graduate School of Chosun University) ;
  • Kim, Yeong-Nam (Dept.of Mechanical Design Engineering, Graduate School of Chosun University) ;
  • Kim, Jeong-Ho (Dept.of Mechanical Automotive Engineering, Sunchon National University) ;
  • Kim, Seon-Gyu (Iksan National College) ;
  • Yang, In-Yeong
  • 차천석 (조선대학교 대학원 기계설계공학과) ;
  • 강종엽 (조선대학교 대학원 기계설계공학과) ;
  • 김영남 (조선대학교 대학원 기계설계공학과) ;
  • 김정호 (순천대학교 기계.자동차공학부) ;
  • 김선규 (익산대학 자동차과) ;
  • 양인영
  • Published : 2001.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

The fundamental and widely used spot welded sections of automobiles (hat and double hat-shaped section members) absorb most of the energy in a front-end collision. The sections were tested on axial static(10mm/min) and quasi-static(1000mm/min) loads. Based on these test results, specimens with various thickness, shape and spot weld pitch on the flange have been tested with impact velocity(7.19m/sec) the same as a real life car clash. Characteristics of collapse have been reviewed and a structure of optimal energy absorbing capacity is suggested.

Keywords

References

  1. 한국자동차공학회, 1996, '자동차 기술 핸드북; 시험평가편,' SAE Korea, pp. 339-350
  2. Ishikawa, H., 1985, 'Computer Simulation of Automobile Collision, Reconstruction of Accidents,' SAE Paper No. 851729
  3. Haug, E., Clinckemaillie, J., Ni. X., Pickett, A. K. and Queckborner, T., 1996, 'Recent Trends and Advances in Crash Simulation and Design of Vehicles,' Proceedings of the NATO-ASl, July, pp. 343-359
  4. Janssen, E. G., 1987, 'Evaluation of Vehicle-Cyclist Impacts Through Dummy and Human Cadaver Tests,' 11th ESV
  5. Pritz, H. B., 1983, 'Experimental Investigation of Pedestrian Head Impacts on Hood and Fenders of Production Vehicles,' SAE Paper No. 830055
  6. Kevin Jost, 1986, 'Air Bag Technology Trends,' Automotive Engineering, pp. 67-80
  7. Mahmood, H. F. and Paluszny, A., 1981, 'Design of Thin Walled Columns for Crash Energy Management- Their Strength and Mode of Collapse,' Proc. 4rd Instructural Conference on Vehicle Structural Mechanics, Nov. 18-20, Detoit, pp. 7-18
  8. Li, S. and Reid, S. R., 1990, 'Relationship Between the Elastic Bucking of Square Tubes and Rectangular Plates,' International Journal of Applied Mechanics, Vol. 57, pp. 969-973
  9. Krauss, C. A. and Laananen, D. H., 1994, 'A Parametric Study of Crush Initiators for a Thin-Walled Tube,' International Journal of Vehicle Design, Vol. 15, pp. 385-401
  10. Avalle, M. and Belingardi, G., 1997, 'Experimental Evaluation of the Strain Field History During Plastic Progressive Folding of Aluminium Circular Tubes,' International Journal of Mechanical Science, Vol. 39, No.5, pp. 575-583 https://doi.org/10.1016/S0020-7403(96)00063-X
  11. Singace, A. A., 1999, 'Axial Crushing Analysis of Tubes Deforming in the Multi-Lobe Mode,' International Journal of Mechanical Science 41, pp. 865-890 https://doi.org/10.1016/S0020-7403(98)00052-6
  12. White, M. D. and N. Jones, 1999, 'Experimental Quasi-Static Axial Crushing of Top-Hat and Double-Hat Thin-Walled Sections,' International Journal of Mechanical Science, 41, pp. 179-208
  13. White, M. D., Jones, N. and Abramowicz, W., 1999, 'A Theoretical Analysis for the Quasi- Static Axial Crushing of Top-Hat and Double-Hat Thin- Walled Sections,' International Journal of Mechanical Sciences, 41, pp. 209-233 https://doi.org/10.1016/S0020-7403(98)00048-4
  14. 차천석, 김정호, 양인영, 2000, '모자형 단면 점용접부재의 축방향 압궤특성에 관한 연구(I),' 한국정밀공학회지, 제17권, 제3호, pp. 192-199