Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Wear and Chip Formation by the Tool on Cutting Nickel-based Heat Resisting Alloy

니켈기 내열합금 절삭기 공구에 따른 마모와 칩생성

  • 김우순 (원광대학교 대학원 기계공학과) ;
  • 김경우 (원광대학교 대학원 기계공학과) ;
  • 김동현 (원광대학교 기계공학과)
  • Published : 2001.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Nickel-based heat resisting alloys are commonly used for high temperature application such as in aircraft engines and gas turbines. In this paper, the machinability of Nickel-based heat resisting alloys was investigated with respect to the wear and the chip formation by tool type and cutting condition. Relationship between three types of tool and chip formation was experimentally investigated. Among the three types of tool tested, coated tools(CVD, PVD) ara available for the difficult-to-cut-materials such as Nickel-based heat resisting alloys and etc.

Keywords

References

  1. Int J. Mach. Tools Manufac. v.36 no.5 Cutting Temperature of Ceramic Tools in High Speed of Difficulit-to-cut Materials T.I.EL-WARDANY;E. MOHAMMED;M. A. ELBESTAWI
  2. Journal of the American Ceramic Society v.78 no.11 Chemical Reactivity of Nickel and Nickel-based Alloys with a SIALON Ceramic J. Vleugels;O. Van Der Biest
  3. Chinese Journal of Mechanical Engineering(English Edition) v.8 no.4 Notch Wear of Machining Nickel-based Alloys with Ceramic Tools N. He;L. Pan;Y. Zhang
  4. Journal of Engineering for Industry, Trans. ASME v.114 no.3 On the Wear Mechanism and Cutting Performance of Silicon Carbid Whisker-reinforced Alumina A. R. Thangaraj;K.J. Weinmann
  5. Reports of the Government Industrial Research Institute v.40 no.3 Cutting Test of Inconel 718 by CBN Tool Y. Tasaki;T. Heta;S. Kume;H. Kajihara;M. Machida
  6. 工業調査會 テ-タでみる切削加工の 最先端技術 狩野勝吉
  7. Proc. 4th. Conf. Prod. Eng. Coated Carbides-Past Present and Future Suh. N.P
  8. 선삭 공구의 모든것 シ-ルエンシニア 編輯部
  9. Cutting Tools 대한중석초경(주)
  10. 한국공작기계학회지 v.7 no.3 이종 금속의 선삭가공특성에 관한 연구 김동현