Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Development of PC-NC Water Jet Cutting System and Cutting of Titanium

PC-NC 제어 Water Jet 가공기의 개발과 티타늄의 시험 절삭

  • Choi, Byung-Mun (Dept.of Precision Mechanical Engineering,Graduate School of Chonbuk National University) ;
  • Hong, Seong-Ki (Dept.of Precision Mechanical Engineering, Graduate School of Chonbuk National University) ;
  • Ryuh, Beom-Sahng (Mechatronics Research Center, Dept.of Mechanical Engineering, Chonbuk National University) ;
  • Park, Sang-Min (Dept.of Precision Mechanical Engineering, Jeonju Technology College)
  • 최병문 (전북대학교 정밀기계공학과 대학원) ;
  • 홍성기 (전북대학교 정밀기계공학과 대학원) ;
  • 유범상 (전북대학교 기계공학부, 메카트로닉스 연구센터) ;
  • 박상민 (전주공업대학 정밀기계과)
  • Published : 2001.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Water jet cutting is a new technology using very high pressure water as a cutting tool. Water jet cutting system consists of water preparation part, pressure generation pate, cutting head, and motion part. A PC-based numerical controlled (PC-NC) X-Y table is developed and water get cutting system is installed thereon. Water jet machining is applicable to various kinds of materials ranging from soft materials such as rubber and meat to hard-to-cut materials such as titanium. This paper shows the application of the abrasive waterjet system to titanium cutting.

Keywords

References

  1. 김형목, '워터젯을 이용한 암석의 절삭에 관한 연구,' 서울대학교 석사학위논문, 1999
  2. 김주우, '순 Ti 및 Ti-6A1-4V 합금의 기계적 성질에 미치는 용접 조건의 영향', 전북대학교 석사학위논문, 1998
  3. Kille, K., 'CAD/CAM Integration into Production Line,' Precise Processing by Advanced Water Jet Technology, Japanese-German Joint Seminar, Shimizu and Sendaj, Japan, 1995
  4. Qmax, Flow Jet Machining Series Catalogue
  5. Labus, T. J. and Hashish, M., 'Fluid Jet Technology Fundamentals and Applications,' section 4.0, Water Jet Technology Association, 1991
  6. Leach, S. J. and Jartman, J. L., 'Hypothesis for the Mechanism of Rock Failure under Impact,' 4 th Symposium, on Rock Mechanics, Pennsylvania State University, PA, pp. 221-228. 1961
  7. Hashish, M., 'Prediction of Depth of Cut with Abrasive-Waterjet,' Submitted for ASME Trans., J. Eng.Materials and Technology
  8. Turbo Tek FX-MCT Series Catalogue