Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

The Effects of the Annealing Heat Treatments on the Mechanical Properties of the Invar Materials

인바재료의 기계적 성질에 미치는 풀림 열처리의 영향

  • 원시태 (서울산업대학교 금형설계학과)
  • Published : 2001.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study examined the effects of the annealing heat treatments on the mechanical properties of the Invar(Fe-36%Ni Alloy) materials. Invar materials were annealed at various temperatures range 900~120$0^{\circ}C$ in vacuum(10-4Torr) and hydrogen atmospheres. And annealing conditions were changed by cooling rate and holding time at 110$0^{\circ}C$. The grain size of rolled Invar materials was very fine but those of annealed Invar materials at 900~120$0^{\circ}C$ in vacuum and hydrogen atmosphere increased with increasing annealing temperature. The micro-vickers hardness values of annealed Invar materials were decreased about 15% that of the rolled Invar materials, regardless of the various of annealing temperatures, atmosphere(vacuum, hydrogen) and annealing conditions. The tensile strength and yield strength of annealed Invar materials at 900~120$0^{\circ}C$ in vacuum and hydrogen atmosphere were decreased 10.0~14.4% and 34.6~39.1% those of the rolled Invar materials, respectively. The strength ratio(tensile strength/ yield strength) of annealed Invar materials was improved to 1.7~1.8 from the value of 1.2~1.3 of rolled Invar materials. The degree of spring back of annealed Invar materials was about 50% of the rolled Invar materials, regardless of the various of annealing temperatures, atmosphere(vacuum, hydrogen) and annealing conditions.

Keywords

References

  1. M. Matsui, S. Chikazumi, 'Analysis of Anomalous Thermal Expansion Coefficient of Fe-Ni Invar Alloys,' J. of Physical Society of Japan, Vol. 45, No. 2, pp. 458-464, 1978
  2. W. F. Schlosser etal, 'The Temperature and Magnetic Field Dependence of the forced Magnetostriction and Thermal expansion of INVAR,' J. of Phys. Chem. Solids, Vol. 32, pp. 927-938, 1971 https://doi.org/10.1016/S0022-3697(71)80338-4
  3. W. F. Schlosser, 'A Model for the Invar Alloys and the Fe-Ni System,' J. of Phys. Chem. Solids, Vol. 32, pp. 939-949, 1971 https://doi.org/10.1016/S0022-3697(71)80339-6
  4. H. Morrow, D. L. Sponseller etal, 'The Effects of Molybdenum and Aluminum on the Thermal Expansion Coefficients of Ni-Base Alloys,' Metallurgical Transactions, Vol. 6, pp. 477-485, 1975 https://doi.org/10.1007/BF02658405
  5. M. L. Theodore, D. A. Colling etal, 'The Determination of small amounts of Sulfur in Fe-Ni Alloys,' Transactions of the Metallurgical Society of AIME, Vol. 245, pp. 1823-1824, 1969
  6. M. Nakamura;K. Tsuya, 'Effect of heat treatment on structure and mechnical properties of sintered Fe-Ni alloys,' Podwer Metallurgy, Vol. 26, No. 3, pp. 149-154, 1983
  7. M. Inaba etal, 'Effect of the Annealing conditions on the Oxidation behavior of Fe-36 Ni Alloys,' Applied Surface Science 27, pp. 164-179, 1986 https://doi.org/10.1016/0169-4332(86)90105-4
  8. H. Kagawa, S. Chikazumi, 'Origin of Effect in Fe-Ni Invar Alloy,' J. of Physics Society Japan, Vol. 43, No. 3, pp. 1097-1098, 1977
  9. J. R. C. Guimaraes, J. c. Shyne, 'On the Effects of Plastic Deformation on Thermal Stabilization of Austenite in Fe-Ni-C Alloy,' Metallurgical Transactions, Vol. 2, pp. 2063-2065, 1971
  10. M. E. Fine and W. C. Ellis, 'Youngs Modulus and its Temperature Dependence in 36 to 52 pct Nickel-Iron Alloys,' J. of Metals, Transactions AIME, Vol. 188, pp. 1120-1125, 1950
  11. G. Hausch, H. Warlimont, 'Single crystalline elastic constants of ferromagetic F.C.C. Fe-Ni Invar Alloys,' ACTA Metallurgical, Vol. 21, pp. 101-414, 1973 https://doi.org/10.1016/0001-6160(73)90197-1
  12. M. Inaba etal, 'Surface segregation of impurities on vacuum annealed 36% Ni-Fe alloy,' J. of Materilas Science Letters 4, pp. 818-821, 1985 https://doi.org/10.1007/BF00720512
  13. '36% Nickel-Iron Alloy for low Temp. Service,' The International Nickel Company INC., Tech. note
  14. B. S. Lement, B. L. Averbach etal, 'The Dimensional behavior of Invar,' Trans. of ASM, Vol. 43, pp. 1072-1951, 1951
  15. M. Nakamura, K. Tsuya, 'Mechanical Properties of duplex Fe-Ni-C alloys prepared by powder metallurgy techniques,' Powder Metallurgy, No. 2, pp. 65-70, 1980
  16. M. Inaba, K. Teshima etal, 'Development of an Invar Shadow Mask for Color Cathode Ray Tubes,' IEEE Transaction on electron devices, Vol. 35, No. 10, pp. 1721-1728, 1988 https://doi.org/10.1109/16.7378
  17. N. J. Park etal, 'Effects of Texture on the Etching Property of Fe-36%Ni Invar Sheets,' Metals and Materials, Vol. 6, No. 1, pp. 51-56, 2000
  18. 'Metallography, Structures and Phase diagrams,' Metals handbook, Vol. 8, ASM, pp. 304, 1973
  19. Yasunori Tanji, 'Thermal Expansion Coefficient and Spontaneous Volume Magnetostriction of Fe-Ni Alloys,' J. of the Physical society of Japan, Vol. 31, No. 5, pp. 1366-1373, 1971
  20. 이동녕, '재료강도학,' 문운당, pp. 208, 1994
  21. M. Nakamura;K. Txuya, 'Effect of phase distribution on mechaninal properties of Fe-Ni heterogeneous alloys, Powder Metallurgy, No. 4, pp. 179-185, 1979
  22. 최태준, '황동판의 성형성에 미치는 압연제조공정의 영향,' 서울산업대 대학원 석사논문, pp. 11, 1996
  23. M. Inaba etal, 'Surface segregation of impurities, manganese and silicon on hydrogen-annealed 36% Ni-Fe alloys,' J. of Materials science Letters 5, pp. 16-18, 1986 https://doi.org/10.1007/BF01671420