Journal of Korean Society of Environmental Engineers (대한환경공학회지)
- Volume 22 Issue 3
- /
- Pages.547-556
- /
- 2000
- /
- 1225-5025(pISSN)
- /
- 2383-7810(eISSN)
Studies on the Adsorption and Desorption Characteristics of Cu Ion Using Manganese Nodule as Adsorbent
Mn단괴를 흡착제로 한 Cu이온의 흡착 및 탈착 특성
- Kim, Jin-Wha (Department of Environmental Science and Engineering, Ewha Womans University) ;
-
Kim, Dong-Su
(Department of Environmental Science and Engineering, Ewha Womans University)
- Received : 1999.09.20
- Accepted : 1999.12.29
- Published : 2000.03.31
Abstract
A study have been conducted for the adsorption and desorption characteristics of Cu ion using manganese nodule as adsorbent. For 100 ppm Cu ion solution, the adsorbed amount of Cu ion was more than 90 % at equilibrium state. Adsorption was equilibrated in 42 hours the adsorption reaction was shown to be first order reaction. For the desorption reaction of Cu ion in the region of solution pH 3.5~9.5, the desorption was completed in the acidic region, but it has been decreased as the pH was raised. Also, the desorption rate was higher in the acidic region compared with alkaline region. The desorbed amount was decreased as the reaction temperature increased, therefore, the desorption reaction was thought to be exothermic. Also, several thermodynamic properties were calculated based on experimental results and compared with theoretically driven values. To see the effect of complexing agent on the desorption of Cu ion, EDTA was introduced and the des orbed amount increased in the presence of EDTA.
용액 내 구리이온의 흡착제로 망간단괴를 사용하여 흡착 및 탈착 양상변화를 검토하였다. 망간단괴의 흡착능은 100 ppm의 구리 용액에 대해 90% 이상의 흡착율을 나타냈으며 흡착평형 시간이 약 42 시간이고 흡착평형에 이르는 반응은 1차반응속도식을 따름을 알 수 있었다. 구리이온이 흡착된 망간단괴를 pH를 3.5~9.5 범위에서 조정하여 탈착실험한 결과, 산성영역에서 100%에 이르는 탈착율을 보였으나 pH가 증가함에 따라 탈착율은 점차 감소하여 염기성영역에서는 탈착율이 약 20 % 정도였다. 또한 산성영역에서는 염기성영역에 비해 탈착속도가 증대됨을 알 수 있었다. 온도에 따른 탈착반응에서는 온도가 증가함에 따라 탈착율이 감소하여 구리이온의 탈착반응이 발열반응임을 파악하였으며, 이를 기초로 탈착반응의 열역학적 계산을 수행하였다. 탈착반응에 있어 착화합물제의 효과를 검토하기 위해 EDTA를 사용한 경우 탈착율이 증가하였으며 EDTA의 농도가 증가함에 따라 탈착율이 점차 증가하였다.
Keywords