참고문헌
- Sztenderowicz, M. L. and Heywood, J. B., 1990, 'Cycle-to-Cycle IMEP Fluctuations in a Stoichiometrically-Fueled S.I. Engine at Low Speed and Load,' SAE Paper 902143
- Ozdor, N., Dulger, M. and Sher, E., 1994, 'Cyclic Variability in Spark Ignition Engines A Literature Survey,' SAE Paper 940987
- Shen, H., Hinze, P. C. and Heywood, J. B., 1994, 'A Model for Flame Initiation and Early Development in SI Engine and its Application to Cycle-to-Cycle Variations,' SAE Paper 942049
- Hoard, J. and Rehagen, L., 1997, 'Relating Subjective Idle Quality to Engine Combustion,' SAE Paper 970035
- Han, S. B., and Chung, Y. J., 1998, 'A Study on the Effect of Operating Conditions for the Stability at Idle,' KSME International Journal, Vol. 12, No. 4, pp. 694-700
- Randolph, A. L., 1994, 'Cylinder - Pressure - Based Combustion Analysis in Race Engine,' SAE Paper 942487
- Heywood, J. B., 1988, Internal Combustion Engine Fundamentals, McGraw-Hill International Editions
- Hinze, P. C., 1993, 'A Study of Fuel Effects on Early Flame Development in a Spark Ignition Engine,' MIT Thesis
- Meyer, R., Kubesh, J. T. and Shahed, S. M., 1993, 'Simultaneous Application of Optic Spark Plug Probe and Head Gasket Ionization Probe to a Production Engine,' SAE Paper 930464
- Kerstein, A. R. and Witze, P. O., 1990, 'Flame-Kernel Model for Analysis of Fiber-Optic Instrumented Spark Plug Data,' SAE Paper 900022
- Shen, H., Hinze, P. C. and Heywood, J. B., 1996, 'A Study of Cycle-to-Cycle Variations in SI Engines Using a Modified Quasi - Dimensional Model,' SAE Paper 961187
- 이종화, 김응서, 1993, '전기점화기관에서 연소의 사이클 변화측정 및 해석' 한국자동차공학회지, Vol. 14, No. 3, pp. 90-101
- Brown, A. G., Stone, C. R. and Beckwith, P., 1996, 'Cycle-by-Cycle Variation in Spark Ignition Engine Combustion - Part I: Flame Speed and Combustion Measurements and a Simplified Turbulent Combustion Model,' SAE Paper 960612
- Cheung, H. M., 1993, 'A Practical Burn Rate Analysis for Use in Engine Development and Design,' MIT Thesis
- Cheung, H. M. and Heywood J. B., 1993, 'Evaluation of a One-Zone Burn-Rate Analysis Procedure Using Production SI Engine Pressure Data,' SAE paper 932749
- Woschni, G., 1967, 'Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine,' SAE Paper 670931
- Kaplan, J. A. 1990, 'Modeling the Spark Ignition Engine Warm-up Process to Predict Component Temperature,' MIT Thesis
- Poulos, S. G. and Heywood, J. B., 1983, 'The Effect of Chamber Geometry on Spark-Ignition Engine,' SAE Paper 830587
- Brunt, M. F. J., 1996, 'Evaluation of IMEP Routines and Analysis Errors,' SAE Paper 960609