DOI QR코드

DOI QR Code

RELTSYS: A computer program for life prediction of deteriorating systems

  • Enright, Michael P. (Department of Civil, Environmental, and Architectural Engineering, University of Colorado) ;
  • Frangopol, Dan M. (Department of Civil, Environmental, and Architectural Engineering, University of Colorado)
  • Published : 2000.06.25

Abstract

As time-variant reliability approaches become increasingly used for service life prediction of the aging infrastructure, the demand for computer solution methods continues to increase. Effcient computer techniques have become well established for the reliability analysis of structural systems. Thus far, however, this is largely limited to time-invariant reliability problems. Therefore, the requirements for time-variant reliability prediction of deteriorating structural systems under time-variant loads have remained incomplete. This study presents a computer program for $\underline{REL}$iability of $\underline{T}$ime-Variant $\underline{SYS}$tems, RELTSYS. This program uses a combined technique of adaptive importance sampling, numerical integration, and fault tree analysis to compute time-variant reliabilities of individual components and systems. Time-invariant quantities are generated using Monte Carlo simulation, whereas time-variant quantities are evaluated using numerical integration. Load distribution and post-failure redistribution are considered using fault tree analysis. The strengths and limitations of RELTSYS are presented via a numerical example.

Keywords

References

  1. Dey, A. and Mahadevan, S. (1998), "Ductile structural system reliability analysis using adaptive importance sampling", Struct. Safety, Elsevier, 20, 137-154. https://doi.org/10.1016/S0167-4730(97)00033-7
  2. Enright, M.P. (1998), "Time-variant reliability of reinforced concrete bridges under environmental attack", PhD Thesis, Dept. of Civ., Envir., and Arch. Engr., University of Colorado, Boulder, Colo.
  3. Enright, M.P. and Frangopol, D.M. (1998a), "Service-life prediction of deteriorating concrete bridges", J. Struct. Engrg., ASCE, 124(3), 309-317. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:3(309)
  4. Enright, M.P. and Frangopol, D.M. (1998b), "Failure time prediction of deteriorating fail-safe structures", J. Struct. Engrg., ASCE, 124(12),1448-1457. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:12(1448)
  5. Enright, M.P. and Frangopol, D.M. (1998c), "Probabilistic analysis of resistance degradation of reinforced concrete bridge beams under corrosion", Engrg Struct., 20(11), 960-971. https://doi.org/10.1016/S0141-0296(97)00190-9
  6. Frangopol, D.M., Lin, K-Y. and Estes, A.C. (1997), "Life-cycle cost design of deteriorating structures", J. Struct. Engrg., ASCE, 123(10),1390-1401. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:10(1390)
  7. Frangopol, D.M., Ghosn, M., Hearn, G. and Nowak, A. (1998), "Guest editorial: Structural reliability in bridge engineering",J. Bridge Engrg., ASCE, 3(4), 151-154. https://doi.org/10.1061/(ASCE)1084-0702(1998)3:4(151)
  8. Hendawi, S. and Frangopol, D.M. (1994), "System reliability and redundancy in structural design and evaluation", Struct. Safety, Elsevier, 16(1,2),47-71. https://doi.org/10.1016/0167-4730(94)00027-N
  9. Melchers, R.E. (1987), Structural Reliability: Analysis and Prediction, Ellis Horwood/Wiley, Chichester, U.K.
  10. Melchers, R.E. (1989), "Importance sampling in structural systems", Structural Safety, Elsevier, 6(1), 3-10. https://doi.org/10.1016/0167-4730(89)90003-9
  11. Mori, Y. and Ellingwood, B. (1993), Methodology for Reliability Based Condition Assessment - Application to Concrete Structures in Nuclear Plants, NUREG/CR-6052, ORNL/Sub/93-SD684, U.S. Nuclear Regulatory Commission, Washington, D.C.
  12. Press, W.H., Teukolosky, S.A., Vetterling, W.T. and Flannery, B.P. (1992), Numerical Recipes in FORTRAN - The Art of Scientific Computing, Second Edition, Cambridge University Press.
  13. Wen, Y.K. and Chen, H-C. (1989), "System reliability under time varying loads: I and II", J. Engrg. Mech., ASCE, 115(4), 808-839. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:4(808)
  14. Yanev, B. (1996), "The management of bridges in New York City", Structural Reliability in Bridge Engineering, D.M. Frangopol and G. Hearn, eds., McGraw-Hill Book Co., Inc., New York, 78-89.

Cited by

  1. Computational platform for the integrated life-cycle management of highway bridges vol.33, pp.7, 2011, https://doi.org/10.1016/j.engstruct.2011.03.005
  2. Advanced Modeling for Efficient Computation of Life-Cycle Performance Prediction and Service-Life Estimation of Bridges vol.24, pp.6, 2010, https://doi.org/10.1061/(ASCE)CP.1943-5487.0000060
  3. Closure to “Cross‐Sectional Modes in Impact‐Echo Testing of Concrete Structures” by Martyn Hill, John McHugh, and John D. Turner vol.127, pp.5, 2001, https://doi.org/10.1061/(ASCE)0733-9445(2001)127:5(597)
  4. Bridge life-cycle performance and cost: analysis, prediction, optimisation and decision-making vol.13, pp.10, 2017, https://doi.org/10.1080/15732479.2016.1267772
  5. Automated finite element updating using strain data for the lifetime reliability assessment of bridges vol.99, 2012, https://doi.org/10.1016/j.ress.2011.11.007
  6. Life-cycle reliability-based optimization of civil and aerospace structures vol.81, pp.7, 2003, https://doi.org/10.1016/S0045-7949(03)00020-8
  7. Discussion and Closure: Condition Prediction of Deteriorating Concrete Bridges Using Bayesian Updating vol.127, pp.5, 2001, https://doi.org/10.1061/(ASCE)0733-9445(2001)127:5(594)
  8. Computational Platform for Predicting Lifetime System Reliability Profiles for Different Structure Types in a Network vol.18, pp.2, 2004, https://doi.org/10.1061/(ASCE)0887-3801(2004)18:2(92)
  9. Life-cycle performance, management, and optimisation of structural systems under uncertainty: accomplishments and challenges1 vol.7, pp.6, 2011, https://doi.org/10.1080/15732471003594427
  10. Structural reliability software and calculation tools: a review vol.5, pp.1, 2000, https://doi.org/10.1007/s41062-020-0282-4