Structural Engineering and Mechanics

  • 제9권3호
  • /
  • Pages.305-321
  • /
  • 2000
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Simplified slab design approach for parking garages with equivalent vehicle load factors

  • Kwak, Hyo-Gyoung (Department of Civil Engineering, Korea Advanced Institute of Science and Technology) ;
  • Song, Jong-Young (Department of Civil Engineering, Korea Advanced Institute of Science and Technology)
  • 발행 : 2000.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper develops a simplified, but effective, algorithm in obtaining critical slab design moments for parking garages. Maintaining the uniformly distributed load concept generally adopted in the design of building structures, this paper also introduces the equivalent vehicle load factors, which can simulate the vehicle load effects without taking additional sophisticated numerical analyses. After choosing a standard design vehicle of 2.4 tons through the investigation of small to medium vehicles made in Korea, finite element analyses for concentrated wheel loads were conducted by referring to the influence surfaces. Based on the obtained member forces, we determined the equivalent vehicle load factors for slabs, which represent the ratios for forces under vehicle loads to these under uniformly distributed loads. In addition, the relationships between the equivalent vehicle load factors and sectional dimensions were also established by regression, and then used to obtain the proper design moments by vehicle loads. The member forces calculated by the proposed method are compared with the results of four different approaches mentioned in current design codes, with the objective to establish the relative efficiencies of the proposed method.

키워드

참고문헌

  1. AASHTO (1992), Standard Specifications for Highway Bridges, AASHTO Inc.
  2. Adolf Pucher (1977), Influence Surface of Elastic Plates, Springer-Verlag Wien.
  3. Akin, John E. and Mofid, Massood (1989), "Numerical solution for response of beams with moving mass", J. ofStruct. Engnr, ASCE, 115, 120-131. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:1(120)
  4. Bakht, B. and Pinjarkar, S.G. (1989), "Review of dynamic testing of highway bridges", TRB 880532, SRR-89-01, 1-33.
  5. British Standard Code of Practice CP3 (1990), Chapter V. Loading: Part 1, British Standard Institution.
  6. Choi, C.K. and Kim, S.H. (1988), "Reduced integration, nonconforming modes and their coupling in thin plateelements", Computers & Structures, 29, 52-62.
  7. DIN 1072 (1983), Standard Design Loads for Buildings: Live Loads, DIN Deutsches Institut fur Normung.
  8. DIN 1055 (1983), Design Loads for Building: Live Loads, DIN Deutsches Institute fur Normung.
  9. IMSL Library (1982), User's Manual, Fortran Subroutines for Mathematics and Statics, 1-4, IMSL Inc.
  10. KSCE (1995), Building Code Requirements for Reinforced Concrete, Korea Society of Civil Engineers, Seoul.
  11. KSCE (1995), Standard Specifications for Highway Bridges, Korea Society of Civil Engineers, Seoul.
  12. Kim, K.H. (1994), Design of Parking Garage Structures, Architectural Culture, Seoul.
  13. Kwak, H.G., Song, J.Y. (1997), "Equivalent vehicle load factors for girder and beam of parking garagestructures", J. of Comp. Struct. Engnr Inst. of Korea, 10, 15-28.
  14. Kwak, H.G., Song, J.Y. (1997), "Equivalent vehicle load factors for slab of parking garage structures", J. ofStruct. Engnr KSCE, 17, 529-540.
  15. Mahil J., Inbanathan and Martin Wieland (1987), "Bridge vibrations due to vehicle moving over rough surface",J. of Struct Engnr, ASCE, 113, 1994-2008. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:9(1994)
  16. Stanton, John F. (1982), "Point loads on precast concrete floors", J. of Struct. Engnr, ASCE, 109, 2619-2637.
  17. Timoshenko, S.P. and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, McGraw-Hill, New York.
  18. UBC (1991), Uniform Building Code, International Conference of Building Officials.
  19. Westergaard, H.M. (1943), "Stress concentrations in plates loaded over small areas", J. of Struct. Div., ASCE,108, 831-856.
  20. Woodring R.E. and Siess, C.D. (1968), "Influence surfaces for continuous plates", J. of Struct. Div., ASCE, 94,(ST1), 211-226.
  21. Yang, Y.B. and Lin, B.H. (1995), "Impact formulas for vehicles moving over simple and continuous beams", J.of Struct Engnr ASCE, 121, 1644-1650. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:11(1644)
  22. Yun, C.B., Kwak, H.G. (1996), "The evaluation of structural behavior in precast concrete underground parkinggarage using the site instrumentations", Report No. 97-z05-175. Samusung Corporation, Seoul.