Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Protective systems for high-technology facilities against microvibration and earthquake

  • Yang, Jann N. (Department of Civil & Environmental Engineering, University of California) ;
  • Agrawal, Anil K. (Department of Civil Engineering, The city College of the City University of New York)
  • Published : 2000.12.25
⟨ Previous Next ⟩

Abstract

Microvibration of high technology facilities, such as semiconductor plants and facilities with high precision equipments, due to nearby road and rail traffic has attracted considerable attention recently. In this paper, a preliminary study is conducted for the possible use of various protective systems and their performance for the reduction of microvibration. Simulation results indicate that passive base isolation systems, hybrid base isolation systems, passive floor isolation systems, and hybrid floor isolation systems are quite effective and practical. In particular, the performances of hybrid floor isolation systems are remarkable. Further, passive energy dissipation systems are not effective for the reduction of microvibration. Finally, the protections against both microvibration and earthquake are also investigated and presented.

Keywords

References

  1. Amick, H. and Bui, S.K. (1991), "A review of several methods for processing vibration data", SPIE, 1619, 253-264.
  2. Andow, K. and Ogawa, Y. (1998), "Predicting microvibration at a semiconductor plant near a high-speed railway", Workshop on Effect of High-Speed Vibration on Structures and Equipment, Taiwan, 57-62.
  3. Davison, E. J. (1970), "On pole assignment in linear systems with incomplete state feedback", IEEE Transactions on Automatic Control, AC-15(3), 348-51.
  4. Dawn, T.M. and Stanworth, C.G. (1979), "Ground vibrations from passing trains", Journal of Sound and Vibration, 66(3), 355-362. https://doi.org/10.1016/0022-460X(79)90852-6
  5. Gordon, C.G. (1991), "Generic criteria for vibration sensitive equipment", SPIE, 1619, 71-85.
  6. Heckl, M., Hauck, G. and Wettschureck, R. (1996), "Structure-borne sound and vibration from rail traffic", Journal of Sound and Vibration, 193(1), 175-184. https://doi.org/10.1006/jsvi.1996.0257
  7. Heiland D. and Beyer K. (1998), "Vibrations in semiconductor fabs", Workshop on Effect of High-Speed Vibration on Structures and Equipment, 63-76, Taiwan.
  8. Ho, Y.C (1997), "Vibration prevention of high speed train near semiconductor facility in Tainan science-based industry park", Symposium for Environmental Technologies and Strategies in Semiconductor Industry, 67-73, Tokyo, Japan.
  9. Hunt, H.E.M. (1996), "Modelling of rail vehicles and track for calculation of ground-vibration transmission into buildings", Journal of Sound and Vibration, 193(1), 185-194. https://doi.org/10.1006/jsvi.1996.0258
  10. Iseki, Y. (1997), "Counter measure of semiconductor factory for earthquake", Symp. for Environ. Technologies and Strategies in Semiconductor Industry, 82-88, Tokyo, Japan.
  11. Jones, C.J.C. and Block, R. (1996), "Prediction of ground vibration from freight trains", Journal of Sound and Vibration, 193(1), 205-213. https://doi.org/10.1006/jsvi.1996.0260
  12. Krylov, V.V. (1996), "Vibration impact of high-speed trains I, effect of track dynamics", J. Acoustical Society of America, 100(5), 3121-3134 https://doi.org/10.1121/1.417123
  13. Kuppelwieser, H. and Ziegler, A. (1996), "A tool for predicting vibration and structure-borne noise emissions caused by railways", J. of Sound and Vibration, 193(1), 261-267. https://doi.org/10.1006/jsvi.1996.0266
  14. Liu, S.C. (1998), "NSF's infrastructure systems research program and high-speed ground transportation research", Workshop on Effect of High-Speed Vibration on Structures and Equipment, Taiwan, 1-15.
  15. Madshus, C., Bessason, B. and Harvik, L. (1996), "Prediction model for low frequency vibration from high speed railways on soft ground", J. Sound and Vibration, 193(1), 195-203. https://doi.org/10.1006/jsvi.1996.0259
  16. Nakamura, Y. et al. (1999), "Development of 6-DOF microvibration control system using giant magnetostrictive actuator", SPIE, 3671, Paper No. 24.
  17. Nelson, J.T. (1996), "Recent developments in ground-borne noise and vibration control", Journal of Sound and Vibration, 193(1), 367-376. https://doi.org/10.1006/jsvi.1996.0277
  18. Spencer, B.F., Jr. and Sain, M.K. (1997), "Controlling buildings: A new frontier in feedback", IEEE Control Systems, 17(6), 19-35. https://doi.org/10.1109/37.642972
  19. Takemiya, H. (1998), "Lineside ground vibrations induced by high speed train passage", Workshop on Effect of High-Speed Vibration on Structures and Equipment, Taiwan, 43-49.
  20. Takemiya, H. and Kellezi, L. (1998), "Paraseismic behaviour of wave impeding block measured for ground vibration reduction", Workshop on Effect of High-Speed Vibration on Structures and Equipment, Taiwan, 51-56.
  21. Ungar, E.E., Starz. D.H. and Amick, C.H. (1990), "Vibration control design of high technology facilities", Sound and Vibration, 24(7), 20-27.
  22. Verhas, H.P. (1979), "Prediction of the propagation of train-induced ground vibration", Journal of Sound and Vibration, 66(3), 371-376. https://doi.org/10.1016/0022-460X(79)90854-X
  23. Yang, J.N., Danielians, A. and Liu, S.C. (1991), "Aseismic hybrid control systems for building structures", Journal of Engineering Mechanics, ASCE, 117(4), 836-853. https://doi.org/10.1061/(ASCE)0733-9399(1991)117:4(836)
  24. Yang, J.N., Li, Z., Danielians, A. and Liu, S.C. (1992), "Hybrid control of nonlinear and hysteretic systems I", Journal of Engineering Mechanics, ASCE, 118(7), 1423-1440. https://doi.org/10.1061/(ASCE)0733-9399(1992)118:7(1423)
  25. Yang, J.N., Wu, J.C. and Agrawal, A.K. (1995a), "Sliding mode control of nonlinear and hysteretic structures", Journal of Engineering Mechanics, ASCE, 121(12), 1386-1390. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:12(1386)
  26. Yang, J.N., Wu, J.C., Kawashima, K. and Unjoh, S. (1995b), "Hybrid control of seismic-excited bridge structures", J. Earthquake Engineering and Structural Dynamics, 24(11), 1437-1451. https://doi.org/10.1002/eqe.4290241103
  27. Yang, J.N., Wu, J.C., Reinhorn, A.M., Riley, M., Schmitendorf, W.E. and Jabbari, F. (1996a), "Experimental verifications of H infinity and sliding mode control for seismic-excited buildings", Journal of Structural Engineering, ASCE, 122(1), 69-75.
  28. Yang, J.N., Wu, J.C. and Li, Z. (1996b), "Control of seismic-excited buildings using active variable stiffness systems", Journal of Engineering Structure, 18(8), 589-596. https://doi.org/10.1016/0141-0296(95)00175-1
  29. Yang, J.N., Wu, J.C., Agrawal, A.K. and Hsu, S.Y. (1997), "Sliding mode control with compensators for wind and seismic response control", J. Earthquake Engineering and Structural Dynamics, 26, 1137-1156. https://doi.org/10.1002/(SICI)1096-9845(199711)26:11<1137::AID-EQE698>3.0.CO;2-D
  30. Yang, J.N. and Agrawal, A.K. (1998), "Protective systems for microvibration reduction of buildings," Proc. of ASIA-Pacific Workshop on Seismic Design and Retrofit of Structures, August 10-13, Taipei, Taiwan, 319-333.
  31. Yang, J.N. and Agrawal, A.K. (1999), "Protective systems for high-technology facilities against microvibration", Proc. of US-Korea Workshop on New Frontier in Infrastructural/Seismic Engineering, August 24-25, Seoul, Korea, Techno-Press, 29-52.
  32. Yang, Y.B. (1998), "Simulation of wave barriers for reduction of train or factory-induced vibration", Workshop on Effect of High-Speed Vibration on Structures and Equipment, Taiwan, 77-116.

Cited by

  1. Stochastic microvibration response analysis of a magnetorheological viscoelastomer based sandwich beam under localized magnetic fields vol.39, pp.18, 2015, https://doi.org/10.1016/j.apm.2015.01.028
  2. Micro-vibration suppression of equipment supported on a floor incorporating magneto-rheological elastomer core vol.330, pp.18-19, 2011, https://doi.org/10.1016/j.jsv.2011.04.020
  3. Hybrid platform for high-tech equipment protection against earthquake and microvibration vol.35, pp.8, 2006, https://doi.org/10.1002/eqe.564
  4. Performance and reliability of semi-active equipment isolation vol.306, pp.1-2, 2007, https://doi.org/10.1016/j.jsv.2007.05.039
  5. A study on AGV-induced floor micro-vibration in TFT-LCD high-technology fabs vol.19, pp.3, 2012, https://doi.org/10.1002/stc.445
  6. Stochastic micro-vibration response characteristics of a sandwich plate with MR visco-elastomer core and mass vol.16, pp.1, 2015, https://doi.org/10.12989/sss.2015.16.1.141
  7. Hybrid platform for vibration control of high-tech equipment in buildings subject to ground motion. Part 2: analysis vol.32, pp.8, 2003, https://doi.org/10.1002/eqe.268
  8. Seismic simulation test of equipment protection by using a fuzzy-controlled smart isolation system vol.20, pp.16, 2014, https://doi.org/10.1177/1077546313479989
  9. Microvibration control platform for high technology facilities subject to traffic-induced ground motion vol.25, pp.8, 2003, https://doi.org/10.1016/S0141-0296(03)00049-X
  10. Experimental study of a hybrid platform for high-tech equipment protection against earthquake and microvibration vol.37, pp.5, 2008, https://doi.org/10.1002/eqe.784
  11. Electric potential response analysis of a piezoelectric shell under random micro-vibration excitations vol.20, pp.10, 2011, https://doi.org/10.1088/0964-1726/20/10/105029
  12. Linear Multiobjective Control Strategies for Wind-Excited Buildings vol.130, pp.4, 2004, https://doi.org/10.1061/(ASCE)0733-9399(2004)130:4(471)
  13. Combined primary–secondary system approach to the design of an equipment isolation system with High-Damping Rubber Bearings vol.333, pp.9, 2014, https://doi.org/10.1016/j.jsv.2013.12.006
  14. Smart platform for microvibration control of high-tech industry facilities vol.17, pp.1, 2017, https://doi.org/10.1007/s13296-016-0160-2
  15. Polynomial friction pendulum isolators (PFPIs) for building floor isolation: An experimental and theoretical study vol.56, 2013, https://doi.org/10.1016/j.engstruct.2013.06.016
  16. Microvibration control of coupled high tech equipment-building systems in vertical direction vol.43, pp.21, 2006, https://doi.org/10.1016/j.ijsolstr.2006.01.004
  17. Assessment of vibrations induced in factories by automated guided vehicles vol.166, pp.4, 2013, https://doi.org/10.1680/stbu.11.00036
  18. Magneto-rheological elastomer (MRE) based composite structures for micro-vibration control vol.9, pp.3, 2010, https://doi.org/10.1007/s11803-010-0019-z
  19. H2-based control strategies for civil engineering structures vol.10, pp.3-4, 2003, https://doi.org/10.1002/stc.26
  20. Road vehicle-induced vibration control of microelectronics facilities vol.4, pp.1, 2005, https://doi.org/10.1007/s11803-005-0032-9
  21. Stochastic micro-vibration suppression of a sandwich plate using a magneto-rheological visco-elastomer core vol.23, pp.2, 2014, https://doi.org/10.1088/0964-1726/23/2/025019
  22. Performance of structure–equipment systems with a novel roll-n-cage isolation bearing vol.87, pp.23-24, 2009, https://doi.org/10.1016/j.compstruc.2009.09.006
  23. Microvibration Control of High Technology Facilities Subjected to Train-induced Excitation using Smart Base Isolation vol.12, pp.2, 2012, https://doi.org/10.9712/KASS.2012.12.2.099
  24. Three-dimensional vibration control of high-tech facilities against earthquakes and microvibration using hybrid platform 2009, https://doi.org/10.1002/eqe.960
  25. Micro-vibration response of a stochastically excited sandwich beam with a magnetorheological elastomer core and mass vol.18, pp.9, 2009, https://doi.org/10.1088/0964-1726/18/9/095005
  26. Application of Smart Isolation Platform for Microvibration Control of High-Tech Industry Facilities vol.14, pp.2, 2014, https://doi.org/10.9712/KASS.2014.14.2.087
  27. Evaluation of microvibration control performance of a smart base isolation system vol.15, pp.4, 2015, https://doi.org/10.1007/s13296-015-1220-8
  28. Hybrid platform for vibration control of high-tech equipment in buildings subject to ground motion. Part 1: experiment vol.32, pp.8, 2003, https://doi.org/10.1002/eqe.267
  29. SIX DEGREE-OF-FREEDOM MICROVIBRATION HYBRID CONTROL SYSTEM FOR HIGH TECHNOLOGY FACILITIES vol.09, pp.03, 2009, https://doi.org/10.1142/S0219455409003168
  30. AGV-induced floor micro-vibration assessment in LCD factories by using a regressional modified Kanai-Tajimi moving force model vol.45, pp.4, 2000, https://doi.org/10.12989/sem.2013.45.4.543