DOI QR코드

DOI QR Code

Strength of prestressed concrete beams in torsion

  • Karayannis, Chris G. (Department of Civil Engineering, Democritus University of Thrace) ;
  • Chalioris, Constantin E. (Department of Civil Engineering, Democritus University of Thrace)
  • Published : 2000.08.25

Abstract

An analytical model with tension softening for the prediction of the capacity of prestressed concrete beams under pure torsion and under torsion combined with shear and flexure is introduced. The proposed approach employs bilinear stress-strain relationship with post cracking tension softening branch for the concrete in tension and special failure criteria for biaxial stress states. Further, for the solution of the governing equations a special numerical scheme is adopted which can be applied to elements with practically any cross-section since it utilizes a numerical mapping. The proposed method is mainly applied to plain prestressed concrete elements, but is also applicable to prestressed concrete beams with light transverse reinforcement. The aim of the present work is twofold; first, the validation of the approach by comparison between experimental results and analytical predictions and second, a parametrical study of the influence of concentric and eccentric prestressing on the torsional capacity of concrete elements and the interaction between torsion and shear for various levels of prestressing. The results of this investigation presented in the form of interaction curves, are compared to experimental results and code provisions.

Keywords

References

  1. ACI Committee 318, (1995), "Building code requirements for structural concrete (ACI 318-95) and commentary (ACI 318R-95)", American Concrete Institute, Detroit.
  2. Alios, A.E. and Rashid, A.H. (1989), "Prestressed concrete rectangular beams subjected to sustained torque", ACI Structural Journal, 86, 469-472.
  3. Anderson, P. (1935), "Experiments with concrete in torsion", Trans. ASCE, 100,949-983.
  4. Cowan, H.J. (1965), Reinforced and Prestressed Concrete in Torsion, Edward Arnold (Publishers) Ltd., London.
  5. Gopalaratnam, V.S. and Shah, S.P. (1985), "Softening response of plain concrete in direct tension", ACI Journal, 82, 310-323.
  6. Hsu, T.T.C. (1984), Torsion of Reinforced Concrete, Van Nostrand Reinhold, New York.
  7. Karayannis, C.G. and Soulis, J.V. (1990), "A numerical method for torsional analysis of structural elements", J. Computers & Structures, 36(4), 755-768. https://doi.org/10.1016/0045-7949(90)90090-O
  8. Karayannis, C.G. (1994), "A model with tension softening for concrete beams under combined torsion, flexure, shear and prestressing", 2nd Conf, on Computational Structures Technology, Proc. Vol. "Advances in Finite Element Techniques", CIVIL-COMP Ltd., 161-167.
  9. Karayannis, C.G. (1995a), "Torsional analysis of flanged concrete elements with tension softening", J. Computers & Structures, 54(1), 97-110. https://doi.org/10.1016/0045-7949(94)00299-I
  10. Karayannis, C.G. (1995b), "A numerical approach to steel fiber reinforced concrete under torsion softening", J. Structural Engineering Review, 7(2), 83-91.
  11. Karayannis, C.G. (2000), "Nonlinear analysis and tests of steel-fiber concrete beams in torsion", J. Structural Engineering and Mechanics, 9(4), 323-338. https://doi.org/10.12989/sem.2000.9.4.323
  12. Karayannis, C.G. and Chalioris, C.E. (2000), "Experimental validation of smeared analysis for plain concrete in torsion", J. of Structural Engineering, ASCE, 126(6).
  13. Mattock, A.H. and Wyss, A.N. (1978), "Full-scale torsion, shear and bending tests of prestressed I-girders", J. of P.C.I., 23(2), 22-41.
  14. Mukherjee, P.R. and Warwaruk, J. (1971), "Torsion, bending, and shear in prestressed concrete", J. of the Structural Division, ASCE, 97, 1063-1079.
  15. Vecchio, EJ. and Collins, M.P. (1986), "The modified compression field theory for reinforced concrete elements subjected to shear", ACI Journal, 83, 219-231.
  16. Victor, D.J. and Aravindan, P.K. (1978), "Prestressed and reinforced concrete T-beams under combined bending and torsion", ACI Journal, 75, 526-532.
  17. Waf a, F.F., Hasnat, A. and Tarabolsi, O.F. (1992), "Prestressed fiber reinforced concrete beams subjected to torsion", ACI Structural Journal, 89, 272-283.
  18. Zararis, P.D. and Penelis, G.Gr. (1986), "Reinforced concrete T-beams in torsion and bending", ACI Journal, 83, 145-155.

Cited by

  1. Effectiveness of the use of steel fibres on the torsional behaviour of flanged concrete beams vol.31, pp.5, 2009, https://doi.org/10.1016/j.cemconcomp.2009.02.007
  2. Predicting of torsional strength of RC beams by using different artificial neural network algorithms and building codes vol.41, pp.7-8, 2010, https://doi.org/10.1016/j.advengsoft.2010.05.009
  3. Experimental investigation of RC beams with rectangular spiral reinforcement in torsion vol.56, 2013, https://doi.org/10.1016/j.engstruct.2013.05.003
  4. Direct design of partially prestressed concrete solid beams vol.27, pp.6, 2007, https://doi.org/10.12989/sem.2007.27.6.741
  5. Non-linear analyses model for composite box-girders with corrugated steel webs under torsion vol.14, pp.5, 2013, https://doi.org/10.12989/scs.2013.14.5.409
  6. Torsional strengthening of rectangular and flanged beams using carbon fibre-reinforced-polymers – Experimental study vol.22, pp.1, 2008, https://doi.org/10.1016/j.conbuildmat.2006.09.003
  7. Analytical model for the torsional behaviour of reinforced concrete beams retrofitted with FRP materials vol.29, pp.12, 2007, https://doi.org/10.1016/j.engstruct.2007.09.009
  8. New modifying truss model and numerical simulation of steel fiber reinforced concrete under pure torsion vol.14, 2018, https://doi.org/10.1016/j.istruc.2018.02.001
  9. Experimental study of the torsion of reinforced concrete members vol.23, pp.6, 2006, https://doi.org/10.12989/sem.2006.23.6.713
  10. Simplified Model for the Torsional Strength of Concrete Beams with GFRP Stirrups vol.19, pp.1, 2015, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000498
  11. Experiments and calculation of U-shaped thin-walled RC members under pure torsion vol.106, 2016, https://doi.org/10.1016/j.engstruct.2015.10.019
  12. Direct Design of Partially Prestressed Concrete Hollow Beams vol.9, pp.4, 2006, https://doi.org/10.1260/136943306778812741
  13. Optimization-Based Improved Softened-Membrane Model for Rectangular RC Members under Combined Shear and Torsion vol.145, pp.2, 2019, https://doi.org/10.1061/(asce)st.1943-541x.0002228
  14. Flexural Behavior of Posttensioned Concrete Beams with Unbonded High-Strength Strands vol.2020, pp.None, 2000, https://doi.org/10.1155/2020/5317456
  15. Torsion of circular open cross-section with corrugated inner and outer surface vol.73, pp.1, 2000, https://doi.org/10.12989/sem.2020.73.1.075
  16. Shear Performance for Prestressed Concrete Hollow Core Slabs vol.10, pp.5, 2020, https://doi.org/10.3390/app10051636
  17. Investigating the behavior of lightweight foamed concrete T-beams under torsion, shear, and flexure vol.219, pp.None, 2000, https://doi.org/10.1016/j.engstruct.2020.110741
  18. Shear and Torsional Design of Reinforced Concrete Members with High-Strength Reinforcement vol.147, pp.2, 2021, https://doi.org/10.1061/(asce)st.1943-541x.0002887