DOI QR코드

DOI QR Code

A study of dynamic responses of incorporating damaged materials and structures

  • Zhang, Wohua (Institute of Geotechnical Engineering, Zhejiang University) ;
  • Chen, Yunmin (Institute of Geotechnical Engineering, Zhejiang University) ;
  • Jin, Yi (Institute of Geotechnical Engineering, Zhejiang University)
  • Published : 2000.08.25

Abstract

This paper concerns the development of a computational model for the damage evolution of engineering materials under dynamic loading. Two models describing the anisotropic damage evolution of a material are presented; the first is based on a power function of the effective equivalent stress and the second on the damage strain energy release rate. The methods for computing the damage accumulated in structural components and their implementation in a finite element programme are presented together with some numerical results. The dynamic response of a damaged structural component and the dynamic behaviour of a damaged material have been studied numerically. This study shows that the frequency spectrum of a damaged structure is down-shifted, while the damping ratio of damaged materials becomes higher, the amplitude of the response significantly increases and the resonance ensuing from the damage growth still occurs in a damaged structure.

Keywords

References

  1. Audoin, B. and Baste, D. (1994), "Ultrasonic evaluation of stiffness tensor changes and associated anisotropic damage in a ceramic matrix Composite", J. of Applied Mechanics, 61, 309-316. https://doi.org/10.1115/1.2901446
  2. Cordebois, J.P. and Sidoroft, F. (1982), Damage Induced Elastic Anisotropy, Edited by Boehler J., Martinus Nijhoft, The Hague, 761-774.
  3. Fahrenthold, E.P (1991), "A continuum damage model for fracture of brittle solids under dynamic loading", J. of Appl. Mech., ASME, 58, 904-909. https://doi.org/10.1115/1.2897704
  4. Gamby, D., Lafurie-Frenot, M. and Henaft-Gardin, C. (1997), "Kinematic wave and non-uniform damage development in composite laminates", Int. J. Damage Mech, 16, 51-61.
  5. Kachanov, L.M, (1986), Introduction to Continuum Damage Mechanics, Martinus Nijhoff Publishers, Brookline MA02146, USA,
  6. Kawamoto, T., Ichikawa, Y, and Kyoya, T, (1988), "Deformation and fracturing behaviour of discontinuous rock mass and damage mechanics theory", Int. J. for Numerical and Analytical Methods in Geomechanics, 12, 1- 30, https://doi.org/10.1002/nag.1610120102
  7. Marigo, J.J. (1985), "Modelling of brittle and fatigue damage for elastic material by growth of microvoids", J. Engg. Fracture Meck. 21, 861-874, https://doi.org/10.1016/0013-7944(85)90093-1
  8. Meirovitch, L (1975), Elements of Vibration Analysis, McGraw-Hill, New York,
  9. Pendey, A,K. and Biswas, M. (1994), "Damage detection in sturctures using changes in flexibility", J. Sound and Vibrations, 169(1), 3-17, https://doi.org/10.1006/jsvi.1994.1002
  10. Valliappan, S., Zhang Wohua and Murti, V, (1990), "Finite element analysis of anisotropic damage mechanics problems", J. Engg. Fracture Meck., 35, 1061-1076, https://doi.org/10.1016/0013-7944(90)90134-3
  11. Valliappan, S, and Zhang Wohua, (1993), "Dynamics analysis of rock engineering problems based on damage mechanics", Int Symp. on Application of Computer Methods in Rock Mechanics and Engineering, Xian Institute of Mining and Tech., China, 268-373,
  12. Valliappan, S, and Zhang Wohua, (1996), "Analysis of structural components based on damage mechanics concept", Current Advances in Mechanical Design and Production, Eds., Elarabi and Wifi, Pergamen Press, 265-280,
  13. Wang Yue-cong, (1993), "Modeling of damping in transient dynamic ftinite element analysis", Ph,D. Thesis, University of New South Wales, Australia,
  14. Zhang Wohua, (1992), "Numerical analysis of continuum damage mechanics", Ph.D. Thesis, University of New South Wales, Australia
  15. Zhang Wohua, (1993), "Fatigue damage analysis of hammer foundation", Proc, of Seminar on Impact of Computational Mechanics on Engineering Problems, Ed, by Pulmano, A,A, BALKEMA Publishers, 167-174,
  16. Zhang Wohua and Valliappan, S, (1998), "Continuum damage mechanics theory and application, Part I: Theory; Part II: Application", Int. J. of Damage Mech., 7, 250-273, 274-297, https://doi.org/10.1177/105678959800700303
  17. Zhang Wohua and Valliappan, S. (1990), "Analysis of random anisotropic damage mechanics problems of rock mass, Part I: Probabilistic simulation; Part II: Statistical estimation", Int, J. Rock Mech and Rock Engg, 23, 91-112, 241-259, https://doi.org/10.1007/BF01020395

Cited by

  1. Numerical modeling of arch dam under blast loading vol.20, pp.2, 2014, https://doi.org/10.1177/1077546312461031
  2. Analysis of fatigue damage character of soils under impact load vol.19, pp.11, 2013, https://doi.org/10.1177/1077546312450732
  3. Dynamic Damage Analysis for Seismic Responses of Arch Dam vol.09, pp.03, 2015, https://doi.org/10.1142/S1793431115500098