Elastomers and Composites
- Volume 35 Issue 2
- /
- Pages.106-114
- /
- 2000
- /
- 2092-9676(pISSN)
- /
- 2288-7725(eISSN)
Foaming Characteristics of Ethylene Vinyl Acetate/Styrene Vinyl Isoprene Styrene Triblock Copolymer Blend
Ethylene Vinyl Acetate / Styrene Vinyl Isoprene Styrene Triblock Copolymer 블렌드의 발포특성
- Heo, Jae-Young (Department of Chemical Engineering, Pusan National University) ;
- Kim, Jin-Tae (Department of Chemical Engineering, Pusan National University) ;
- Yoon, Jung-Sik (Korea Institute of Footwear and Leather Technology) ;
-
Yoo, Jong-Sun
(Korea Institute of Footwear and Leather Technology) ;
-
Kim, Won-Ho
(Department of Chemical Engineering, Pusan National University)
- 허재영 (부산대학교 공과대학 화학공학과) ;
- 김진태 (부산대학교 공과대학 화학공학과) ;
- 윤정식 (한국신발피혁연구소) ;
-
유종선
(한국신발피혁연구소) ;
-
김원호
(부산대학교 공과대학 화학공학과)
- Published : 2000.06.30
Abstract
The foam of ethylene vinyl acetate (EVA)/styrene-vinyl isoprene-styrene triblock copolymer(SVIS) blend was prepared to improve the shock-absorption and compression set characteristics at room temperature. The effects of blowing agent and blend ratio of EVA/SVIS on expansion ratio, cell structure and mechanical properties of the foam were investigated. As the SVIS content increased, the viscosity of blends was increased but the crosslinking rate was slow down, the expansion ratio was decreased. and the specific gravity was increased. At room temperature, the resilience was not affected by increasing the amount of blowing agent. The value of tan
상온에서의 충격 흡수특성과 compression set 특성을 향상시키기 위하여 ethylene vinyl acetate copolymer (EVA)와 styrene vinyl isoprene styrene triblock copolymer (SVIS)를 블렌드하여 발포체를 제조하였다. 발포제 및 EVA/SVIS 블렌드비가 발포배율 및 기계적 물성에 미치는 영향을 조사하였다. SVIS 함량이 증가함에 따라 블렌드의 점도는 증가하였고 가교 속도는 감소하였으며, 발포배율은 감소하여 비중은 증가하였다. 발포제 함량 증가, 즉 발포배율 증가에 따른 반발탄성은 변화가 없는 반면에, SVIS 함량 증가에 따라 발포체의 상온에서의 tan