References
- H.G. Steinhagen, 'The Plate Clutch,' SAE 800978, 1980
- F. Zimmermann and H. Oetting, 'An Automatic Dry Friction Clutch for Passenger Cars and Light Duty Trucks,' SAE 860383, 1986
- J.J. Willyard, 'Heavy duty, Large Single Plate Diaphragm spring, Dry Clutches,' SAE 892476, 1989
- U.H. Gomman, 'Gas nitriding : choosing metals for success,' Heat treating(march), pp. 19-23, 1991
- R. Riedl, 'The Determination of Austenite Grain size in Ferrous Metals,' Metallography 14, pp. 119-128, 1981 https://doi.org/10.1016/0026-0800(81)90036-7
- J.O. Almen and A. Laszlo, 'The Uniform Section Disk Spring,' ASME, Vol. 58, pp. 305-314, 1936
- G. Schremmer and Braunschweig, 'Dynamische Festigkeit von Tellerfedern,' KONSTRUKTION 17, pp. 473-479, 1965
- W.A. Brecht and A.M. Wahl, 'The Radially Tapered Disk Spring,' Trans. ASME Vol. 52 part 1, pp. 43-55, 1930
- I.C. Maycock, 'Improvements in Agricultural Tractor Clutch Performance,' SAE 831348, 1983
- D. Holland and W. Dahl, 'Influence of tempering conditions on the toughness of high strength spring steels,' Wire 43, pp. 72-76, 1993
- H.Berns and A.Fischer, 'Tribological stability of metallic materials at elevted temperatures,' Wear 162-164, pp. 441-449, 1993 https://doi.org/10.1016/0043-1648(93)90528-T
- J.M.Bello and B.J.Fernandez, 'Internal stresses induced by laser surface hardening of 50CrV4 steel-Effects on fatigue behaviour,' Welding International 1993 Vol. 7(2), pp. 106-114, 1993
- Y. Murakami, 'Stress Intensity Factors Handbook,' Vol. 1, pp. 3
- 'Standard Test Method for Measurement of Fatigue Crack Growth Rates,' ASTM E647-88a, 1991
- J.Lu and J.F.Flavenot, 'Applications of the incremental hole-drilling method for measurement of residual-stress distribution,' Experimental Techniques, pp. 18-24, 1989
- J.M.Bello and B.J.Fernandez, 'Fatigue performance and residual stresses in laser treated 50CrV4 steel,' Journal of meterials science 29, pp. 5213-5218, 1994 https://doi.org/10.1007/BF01151119
- A.Taylor, 'An Introductions to X-Ray Metallography,' John Wiley & Sons, Inc., pp. 664, 1945
- H.P.Klug and L.E.Alexander, 'X-ray diffraction procedures,' John Wiley & Sons, Inc., pp. 531-562, 1973