Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Nonlinear Friction Compensation using the Information of Integral Controller

적분 제어기 정보를 이용한 비선형 마찰보상

  • Published : 2000.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents simple and effective nonlinear friction compensation methods. When the direction of position command reverses, the integrator output of the PID controller does not change the sign of its output instantaneously, due to friction at zero velocity, i.e. stiction resulting tracking errors, that results in continuous push even though the command direction has been changed. To overcome this problem, we attempt to reverse the sign of the integrator output as the sign of velocity changes. The effectiveness of this approach is demonstrated by experiments on a 3-PRPS (Prismatic-Revolute-Prismatic-Shperical joints) in-parallel 6-D.O.F manipulator. The control strategy has been analyzed for stability. Also discussed are disturbance observer and velocity observer approaches for friction compensation.

Keywords

References

  1. B. Armstrong-Helouvry, 'Stick slip and control in low-speed motion,' IEEE Trans. Automatic. Control., vol. 38, Oct. 1993 https://doi.org/10.1109/9.241562
  2. C.Canudas, H. Olsson, K. J. Astrom, and P. Lischinsky, 'Dynamic friction models and control design,' in Proc. American Control Conf., June. pp.10-12. 1993
  3. L.Cai and G.Song, 'A Smooth Robust Nonlinear Controller for Robot Manipulators with Joint Stick-Slip Friction,' IEEE Proc. of the IEEE Int. Conf. Robot & Automation, pp.449-454, 1993 https://doi.org/10.1109/ROBOT.1993.292213
  4. G.Morel and S.Dubowsky, 'Precise Control of Manipulators with Joint Friction: A Base Force/Torque Sensor Method,' Proc.of the IEEE Int.Conf Robotics & Automation, pp.360-365, 1996 https://doi.org/10.1109/ROBOT.1996.503803
  5. Canudas,C. , Astrom,K.J., and Braun,K. 'Adaptive Friction Compensation in DC-Motor Drives,' IEEE Journal of Robotics and Automation, Vol.RA-3, No6, pp.681-685,1987
  6. J.T.Teeter and M.Y.Chow, 'A Novel Fuzzy Friction Compensation Approach to Improve the Porformance of a DC Motor Control System,' IEEE Transactions on Industrial Electronics, Vol.43 No.1, pp.113-120, 1996 https://doi.org/10.1109/41.481415
  7. K.Kiguchi, T.Fukuda, 'Fuzzy Neural Friction Compensation Method of Robot Manipulation During Position/Force Control,' Proc. of the IEEE Int.Conf. Robotics & Automation., pp.372-377, 1996 https://doi.org/10.1109/ROBOT.1996.503805
  8. K. Ohnishi, M.shiata, T. Murakami, 'Motion Control for Advanced Mechatronics,' IEEE/ASME Tranc. on Mechatronics, vol.1 , no. 1 ,March. 1996 https://doi.org/10.1109/3516.491410
  9. T. Umeno, Y Hori, ' Robust speed control of DC servomotors using Modem Two Degrees-of-Freedom Controller Design,' IEEE Trans. on Industrial Electronics, vol. 38, no.5, pp. 363-368. Oct. 1991 https://doi.org/10.1109/41.97556
  10. 송진일, 김동일, 김성권외 7인, '삼성 CNC의 개발 및 적용,' 제 3 회 CNC 콘트롤러 위크샵, 제어계측 신기술 연구 센터, 서울대학교, 1994
  11. J.H.Shim, H.S.Cho, and S. Kim, 'A New Probing System for the In- Circuit Test of a PCB,' Proc. of the IEEE Int. Conf. on Robtics & Automation, pp.580-585, 1996
  12. J.H.Shim, J.Y.Park, D.S.Kwon, H.S.Cho, and S.Kim, 'Kinematic Design of a Six Degree-of-Freedom In-Parallel Manipulator for Probing Task,' Proc. of the IEEE Int. Conf. on Robtics & Automation, pp.2967-2973, 1997 https://doi.org/10.1109/ROBOT.1997.606738
  13. K. Ohnishi, N. Matsui, Y Hori, 'Estimation, Identification, and Sensorless Control in Motion Control System,' Proc. of the IEEE, vol. 82, no.8, Aug. 1994 https://doi.org/10.1109/5.301687
  14. 최용훈, 심재홍, 권도수, 조형석, '병렬 구동 매니퓰레이터의 외란 및 속도 추정을 이용한 정밀 위치 제어,' Proceedings of the 12th KACC, pp1796-1799, October, 1997
  15. J.I.Song, Y.H.Choi, J.H.Shim, D.S.Kwon, H.S.Cho, 'Nonlinear Friction Compensation Methods for an In-Parallel Actuated 6-D.O.F Manipulator,' Proc. of the IEEE Int.Conf. on Robotics& Automation., pp.169-174,1998 https://doi.org/10.1109/ROBOT.1998.676352