초록
지형공간정보체계 중 토지정보체계를 통하여 지형 및 지적자료의 통합활용에 관한 사용자들의 요구는 계속 증가하고 있어 그 해결방안에 대한 연구가 필요하다. 본 연구에서는 지형 및 지적자료의 통합에 따른 문제점해결을 위하여 자료의 오류유형검출 및 조정기법을 다루었다. 이를 위하여 먼저 도형자료와 속성자료로 나뉘어져 있는 지적자료의 1차 통합자료모형을 구현하였고 다음으로 지적자료 중 도형자료를 지형자료의 도형자료와 일치시키는 개선된 방법으로 지적자료와 지형자료에 대한 2차 통합자료모형을 구현하였다. 이와 같은 연구로부터 도형자료(지적도면)와 속성자료(부동산관리체계)가 이중으로 관리됨으로써 생기는 각종 오류유형 및 원인을 확인하였고, 1차 통합자료모형을 제작하여 이들 오류에 대한 개선 방안을 제시할 수 있었다. 또한 지적도를 지형도에 일치시키기 위하여 일반적인 rubber sheeting, 좌표변환 등 기존의 방법을 이용한 경우보다 본 연구에서 개발한 다중블록조정기법을 적용한 결과, 기준점과 필지 면적에 있어 보다 향상된 정확도를 확보함으로써 2차 통합자료모형을 구현할 수 있었다.
With the increasing needs for the integrated use of topographic and cadastral data in order to build an efficient geo-spatial information system. it is urgently necessary to research into its solution. The intention of this study is to detect error types of data and to propose adjustment methods for solving the problems caused by integrating topographic and cadastral data. For this purpose a primary integrated data model is created to link attribute data(land management system) and graphic data within cadastral information in the first step. In next, a secondary integrated data model based on the improved method is formed to coincide the graphic data of cadastral map with that of topographic map. At the first, because a numerous error types md sources caused by separate management of graphic and attribute data are easily checked, it is possible to suggest an improved method to correct these errors using the primary integrated data model. In addition, the accuracy in position and area with coordinate transformation method based on multi-block adjustment is more efficient than rubber-sheeting method. As a result, the secondary integrated data model could be built by harmonizing cadastral map with topographic map using the improved solution.