Mechanical Properties of Talc-Filled Polypropylene : Coupling Agent Effect

Talc로 충전된 폴리프로필렌의 기계적 물성 : 커플링제 효과

  • 김주성 (성균관대학교 화학공학과) ;
  • 최미애 (기술표준원 유기화학과) ;
  • 박태욱 (기술표준원 유기화학과) ;
  • 김덕준 (성균관대학교 화학공학과)
  • Published : 2000.11.01

Abstract

The effect of unreactive coupling agent on mechanical and thermal properties of talc-filled polypropylene (PP) composites was studied. Stearic and oleic acids were introduced as coupling agents, and tensile, flexural, and impact strength, thermal stability and melting transition temperature were measured and analyzed according to the types and concentration of coupling agents. Tensile and flexural strength were enhanced by introduction of coupling agent and the maximum effect was observed at the concentration of 3 wt% of coupling agent. Tensile and flexural strength of PP treated with oleic acid were higher than those of PP treated with stearic acid. but impact strength vice-versa. The reasons for these results were postulated by analyzing morphologies of talc-filled PP observed by SEM.

비반응성 커플링제기 도입에 따라 talc가 충전된 폴리프로필렌의 기계적, 열적 물성에 미치는 영향을 살펴보았다. 커플링제로서 stearic acid와 이와 화학적으로 유사한 구조를 가지는 oleic acid를 사용하였으며 커플링제의 종류 및 농도에 따라 talc로 충전된 폴리프로필렌의 인장강도, 굴곡강도, 충격강도 및 열적안정성, 용융전이점 등을 측정, 분석하였다. 인장강도와 굴곡강도는 커플링제의 종류에 관계없이 커플링제의 도입에 따라 증가하였으며, talc 대비 3 wt%의 농도에서 최대값을 보였다. 인장강도와 굴곡강도에서는 oleic acid로 처리한 시편의 강도가 stearic acid로 처리한 시편의 강도보다 높은 값을 나타내었으나, 충격강도에서는 그 반대의 결과를 나타내었다. 전자주사현미경 (SEM)을 이용하여 각 시편의 모폴로지를 관찰함으로써 이러한 결과에 대한 원인을 유추해 보았다.

Keywords

References

  1. Polym. Eng. & Sci. v.30 J. Jancar;J. Kucera
  2. J. Appl. Polym. Sci. v.42 M. Fujiyyama;T. Wakino
  3. Polym. Eng. & Sci. v.24 C. Busign;R. Lahtinen
  4. J.Appl.Polym.Sci v.71 W. Qui;K. Mai;H. Zeng
  5. Polymer(Korea) v.12 S. S. Yang;W. S. Ahu;I. S. Noh;S> Y. Kim
  6. J. Appl. Polym. Sci. v.71 X. Yuan;Y. Zhang;X. Zhang
  7. J. Appl. Polym. Sci. v.35 W-Y Chiang;W-D Yang
  8. Polym. Eng. & Sci. v.29 P. Bajai;N. K. Jha;R. K. Jha
  9. Polypropylene Structure, Blend and Composites Composite v.3 J. Karger-Kocsis
  10. J. Appl. Polym. Sci. v.38 R. G. Raj;B. V. Kokta
  11. J. Appl. Polym. Sci. v.32 T. Kowalewski;Galeski
  12. ANTEC '96 B. E. Tiganis;R. A. Shanks;Y. Long
  13. J. Polym. Sci. v.71 K. Mai;H. Zeng;W. Qui