한국분말재료학회지 (Journal of Powder Materials)

  • 제7권4호
  • /
  • Pages.212-217
  • /
  • 2000
  • /
  • 2799-8525(pISSN)
  • /
  • 2799-8681(eISSN)
한국분말재료학회 (*구 분말야금학회) (The Korean Powder Metallurgy & Materials Institute)
권호 표지

$Al_2O_3$/5vo1%Cu 나노복합재료의 제조 및 기계적특성

Preparation and Mechanical Properties of $Al_2O_3$/5vo1%Cu Nanocomposites

  • 오승탁 (한양대학교 금속재료공학과) ;
  • 이재성 (한양대학교 금속재료공학과) ;
  • 발행 : 2000.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An optimum route to fabricate the $Al_2O_3/Cu$ nanocomposites with sound microstructure and improved mechanical properties was investigated. Microstructural investigations for the composites prepared using $Al_2O_3/Cu$-nitrate showed that fine Cu particles with average size of 150 nm were homogeneously distributed within the $Al_2O_3$ matrix grains and at the grain boundaries. Fracture strength of 953 MPa and toughness of 4.8 Mpa(equation omitted)m were measured for the composite. The strengthening and toughening of the composites are explained by the refinement of the microstructure and the crack bridging/deflection, respectively.

키워드

참고문헌

  1. Proceedings of the First MRS International Meeting on Advanced Materials v.4 K.Niihara;A.Nakahira;G.SasakiM.Doyama(ed.);S.Somiya(ed.);R.P.H.Chang(ed.)
  2. J. Ceram. Soc. Jpn. v.99 K.Niihara
  3. J.Europ. Ceram. Soc. v.17 M.Sternitzke
  4. J. Am. Ceram. Soc. v.83 S.T.Oh;K.Tajima;M.Ando;T.Ohji
  5. Nanostruct. Mater. v.6 T.Sekino;K.Niihara
  6. J. Am. Ceram. Soc. v.80 T.Sekino;T.Nakajima;S.Ueda;K.Niihara
  7. J. Am. Ceram. Soc. v.81 S.T.Oh;M.Sando;K.Niihara
  8. Scripta Mater. v.39 S.T.Oh;M.Sando;K.Niihara
  9. Nanostruct. Mater. v.10 S.T.Oh;M.Sando;T.Sekino;K.Niihara
  10. Gmelins handbuch der Anorganischen Chemie Cu.,8. Aufl., System-Nummer 60
  11. Trans. Metall. Soc. AIME v.175 C.S.Smith
  12. Introduction to Ceramics W.D.Kingery;H.K.Bowen;D.R.Uhlmann
  13. J. Am. Ceram. Soc. v.73 A.G.Evans
  14. J. Mech. Phy. Solids v.36 B.Budiansky;J.C.Amazigo;A.G.Evans
  15. J.Europ. Ceram. Soc. v.6 W.H.Tuan;R.J.Brook