Composites Research

  • 제13권4호
  • /
  • Pages.19-32
  • /
  • 2000
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지

Thixoforming을 위한 금속복합재료의 재가열 공정

Reheating Process of Metal Matrix Composite for Thixoforming

  • 발행 : 2000.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문은 강화입자가 균일하게 분산된 금속 복합재료의 제조와 반용융 성형을 위한 재가열에 관한 연구결과이다. 강화재 크기의 종류에 따른 금속복합재료를 제조하기 위하여 전자기식 교반과 기계식 교반을 동시에 이용한 복합 교반법을 사용하였다. 복합 교반법에 의하여 제조된 금속복합재료의 분산 상태를 조사하였다. 복합재료를 제조하기 위한 전자기식 교반법과 기계식 교반법을 겸용으로 한 공정이 소개되었다. 금속복합재료의 반용융성형을 위해서, 금속복합재료의 빌렛과 코일표면사이의 길이, 코일의 지름과 빌렛사이의 길이로 구성된 함수로 최적의 코일을 설계하여 빌렛을 재가열하였다. 복합재료의 반용융 성형시에 필요한 재가열 공정 인자인 가열시간과 온도변화의 관계를 조사하였다. 재가열중 강화재의 분산상태가 온도변화에 미치는 영향에 대하여 검토하였다.

The fabrication process of particulate metal matrix composites(PMMCs) with homogeneous distribution of reinforcement and reheating for thixoforming has been studied. Both of eletro-magnetic stirring and mechanical stirring were used to fabricate particulate metal matrix composites(PMMCs) for variation of particle size. The electrical and mechanical processing conditions for fabricating PMMCs are also suggested. For thixoforming of PMMCs, fabricated bi1lets are reheated by using the designed optimal coil with as function of length between PMMC billet and coil surface, and coil diameter and billet. The effect of reinforcement distribution according to variation of billet temperature were investigated with solid fraction theory with a function of matrix alloy and volume fraction of reinforcement.

키워드

참고문헌

  1. J. of Japan Institute of Light Metals v.45 no.2 Fabrication of thin tubes of SiC whisker alloy composite by extrusion and their mechanical properties H. Morimoto;H. Iwamura;K. Ohuchi;Y. Ashida
  2. J. of Composits Materials v.27 no.2 Effect of Extru-sion during Hot Extrusion of Aluminar Short Fiber Orientation and Breakage C.G. Kang;S.S. Kang
  3. J. of Composites Materials v.27 no.2 Effect of Thermal Cycling on the Properties of Aluminum Alloy-Alumina Short Fiber Composites Hot Extrusted T. Hikosaka
  4. Proceedings of an Interna-tional Conference A Review of Semi-Solid Slurry Processing of Al-Matrix Composites J.A. Cornie;H.K. Moon;M.C. Flemings
  5. J. of Metals Rheocasting Al Matrix Composties F.A. Girot;L. Albingre;J.M. Quenisset;R. Naslain
  6. Proceedings of an International Conference A Literature Review on Fabrication Techniques of Particulates Rein-forced Metal Composites S. Caron;J. Masounave
  7. The 3rd Intl Conf. on Semi-Solid Processing of Alloy and Compos-ite Compocasting Conditions and Mechani-cal Properties of Aluminum Matrix Composite Reinforced by SiC Particles Y. Morita;K. Ozawa;Y. Ando;S. Yahata;A. Nanba
  8. The 2nd Intl Conf. on Semi-Solid Processing of Alloy and Composites Fabrication of SiC Whisker Reinforced Aluminum Alloy Matrix Composites by Compocasting Process K. Miwa;I. Takashi;T. Ohashi
  9. J. of the Japan Society For Technology of Plasticity v.24 no.272 Mashy-State Processing of Alloy Com-posite Reinforced with Silicon Carbide M. Kiuchi;S. Sugiyama;N. Kuwasaki;Y. Hoshino
  10. J. of the Japan Society For Technology of Plasticity v.30 no.346 Mashy-State Processing of Alloy Composite Reinforced with Silicon Carbide Short Fibers M. Kiuchi;S. Sugiyama;N. Kuwasaki;Y. Hoshino
  11. Mat. Sci. & Eng v.A196 Microstructure and Compression Behaviour in the Semisolid State of Short-fiber-reinforced A356 Aluminum Alloys L. Nguyen Thanh;M. Sury
  12. Sci & Eng. of Composite Mat. UK v.7 no.3 Net Shape Forming of Electromagnetically Elaborated Semisolid Metal Matrix Composites F. Adam;C. Vivs
  13. Script Metallugic et Material v.32 no.9 A Continuous Fabrication of Al₂O₃ Short Fiber Reinforced Alu-minium Composites by Direct Rolling Process C.G. Kang;Y.D. Kim
  14. Microstructure Formation During Solidfication of Metal Matrix Composites Nucleation of Phases during Solidifi-cation Processing of Metal Matrix Composites P.K. Rohatgi;C.S. Narendranath;S. Ray;R. Asthana
  15. Metal-lurgical and Materials Transactions B An Induction Heating Process with Coil Design and Solutions Avoiding Coarsening Phenomena of Al-6%Si-3%Cu-0.3%Mg Alloy for Thixoforming H.K. Jung;C.G. Kang
  16. Proceedings of the 6th Int. Conf. on Technology Plasticity Coil Design of Inductive Heating and Reheating Process of Aluminum Alloys for Thixoforming C.G. Kang;H.K. Jung;Y.J. Jung
  17. Conduction and Induction ?cating E.J. Davies
  18. Induction Heating N.R. Stansel
  19. Metals Handbook v.2-1 Nonferrous Alloys and ?ecial-Purpose Materials
  20. Metals Handbook v.2-1 Nonferrous Alloys and ?ecial-Purpose Materials
  21. Met. Trans. A v.18A no.87 The Squeeze filtration Process for Fabrication of Metal matrix Composites T.W. Clyne;J.F. Mason
  22. J. of Japan Institute of Light Met-als v.43 no.1 Fabrication of particulate rutile TiO₂/Al composites by squeeze casting and their structural characteristics I. Tsuchitori;H. Fukunaga
  23. Journal of Materials Processing Tech-nology v.45 Semi-Solid Forming of Aluminum Alloys by Direct Forging and Lateral Extrusion G. Hirt;R-Cremer;A. Winkelmam;T. Witulskiand;M. Zillgen