광강도형 광섬유센서를 이용한 피로손상 및 진동감지

Fatigue Damage Detection and Vibration Sensing Using Intensity-Based Optical Fiber Sensors

  • 양유창 (포항공과대학교 기계공학과 대학원) ;
  • 전호찬 (대우중공업) ;
  • 한경섭 (포항공과대학교 기계공학과)
  • 발행 : 2000.02.01

초록

광섬유센서를 이용한 복합적층판의 피로손상 감지 및 진동측정, 그리고 스틸 보에 대한 충격위치 검출에 관한 연구가 수행되었다. 피로과정중의 신호는 복합재료 내에 삽입된 광섬유와 표면에 부착한 광강도형 광섬유센서, 그리고 스트레인게이지로부터 동시에 측정되었다. 진동감지 실험은 복합재료 보의 표면에 광섬유센서를 부착하여 자유진동 및 강제진동 신호를 취득하였다. 충격위치 검출에 관한 실험에서 충격위치는 충격에 의해 발생된 구조물의 진동이 두 센서에 도달하는 시간의 차를 이용하여 구할 수 있다. 광강도형 광섬유센서를 이용하여 반복 피로 신호를 잘 취득할 수 있었으며 스트레인게이지에 비하여 피로저항성이 우수함이 확인되었다. 광섬유센서는 갭센서와 동일하게 진동신호를 감지하였고 구조물에 가해진 충격위치를 비교적 정확히 검출할 수 있었다.

Fatigue damage detection and vibration sensing for a laminated composites and impact location detection for a steel beam have been carried out using optical fiber sensor. Intensity based optical fiber sensor is constructed by placing two cleaved fiber end in a hollow glass tube, and multiple reflection within the cavity is considered. Fatigue signals are measured by embedded optical fiber, surface mounted optical fiber sensor and strain gage simultaneously. For vibration sensing, optical fiber sensor is mounted on the carbon fiber composite beam and its response to free vibration and forced vibration is investigated. In impact location detection, two optical fiber sensors are used and the information obtained from two sensors is arrival time delay of vibration caused by impact. Impact location can be calculated from this time delay. The obtained results show that the intensity based optical fiber sensor provide reliable data during long-term fatigue loading, unlike strain gage which deteriorate during the early part of the fatigue test. Optical fiber sensor signals coincide with gap sensor in vibration sensing. The precise locations of impact can be detected within 4.1% error limit.

키워드

참고문헌

  1. Review of Scientific Instruments v.66 An Overview of Fiber-Optic Sensors Udd, E.
  2. Smart Mater. Struct. v.4 A Structurally Integrated Bragg Grating Laser Sensing System for a Carbon Fiber Prestressed Concrete Highway Bridge Measures, R. M.;Alavie, A. T.;Maaskant, R.;Ohn, M.;Karr, S.;Huang, S.
  3. Smart Mater. Struct. v.7 Multiplexed Bragg Grating Optical Fiber Sensors for Damage Evaluation in Highway Bridges Idriss, R. L.;Kodindouma, M. B.;Kersey, A. D.;Davis, M. A.
  4. Smart Mater. Struct. v.7 Application and Reliability of a Fiber Optical Surveillance System for a Stay Cable Bridge Bronnimann, R.;Nellen, P. M.;Sennhauser, U.
  5. Smart Mater. Struct. v.4 Performance of Embedded Short-Gage-Length Optical Fiber Sensors in a Fatigue-Loaded Reinforced Concrete Specimen De Vries, M.;Nasta, M.;Bhatia, V.;Tran, T.;Greene, J.;Claus, R. O.
  6. Opt. Laser Eng. v.16 Fiber Optic Sensor for Smart Structures Measures, R. M.;Le Blone, M.;Liu, K.;Ferguson, S.;Valis, T.;Hogg, D.;Turner, R.;McEwen, K.
  7. Proc. 1st Eur. Conf. on Smart Structures and Materials Fiber-Optic Interferometric Sensors for Concrete Structures Escobar, P.;Gusmeroli, V.;Martinelli, M.;Lanciani, I.;Morabito, P.
  8. Composites v.21 no.3 Use of Embedded Optical Fibre for Significant Fatigue Damage Detection in Composites Material Waite, S. R.
  9. 대한기계학회논문집 A권 v.23 no.5 광강도형 광섬유센서를 이용한 강구조물의 균열진전 감시 이동춘;이정주;권일범
  10. J. of Lightwave Technology v.10 no.11 Spatially Weighted Vibration Sensor Using Tapered Two-Mode Optical Fibers Murphy, K. A.;Fogg B. R.;Vengsarkar, A. M.
  11. SPIE v.2191 Fiber Optic bragg Grating Array for Shape and Vibration Mode Sensing Davis, M. A.;Kersey, A. D.;Sirkis J.;Friebele, E. J.
  12. Smart Mater. Struct. v.4 Optical Fiber Sensing Technique for Impact Detection and Location in Composites and Metal Specimens Greene, J. A.;Tran, T. A.;Bhatia, V.;Gunther, M. F.;Wang, A.;Murphy, K. A.;Claus, R. O.
  13. Smart Mater. Struct. v.7 Detecting Impact Damage in a Composite Material with an Optical Fibre Vibration Sensor System Doyle, C.;Fernando, G.
  14. Proc. SPIE v.2718 An Intensity-Based Fiber Optic Vibration Sensor Doyle, C.;Fernando, G.
  15. Smart Mater. Struct. v.6 Vulnerability of Embedded EFPI-Sensors to Low-Energy Impacts Levin, K.;Jarlas, R.
  16. Smart Mater. Struct. v.7 Measurement and Analysis of Impact-Induced Strain Using Extrinsic Fabry-Perot Fiber Optic Sensors Akhavan, F.;Watkins, S. E.;Chandrashekhara, K.
  17. Smart Mater. Struct. v.4 An Intensity-Based Optical Fibre Sensor for Fatigue Damage Detection in Advanced Fibre-Reinforced Composites Badcock, R. A.;Fernando, G. F.