Plasma Activated Sintering법으로 제조된 지르코니아의 소결특성에 미치는 온도의 영향

Effect of Temperature on Sintering Properties in Zirconia Fabricated by Plasma Activated Sintering

  • 신종호 (창원대학교 공과대학 금속재료공학과) ;
  • 정연길 (창원대학교 공과대학 세라믹공학과) ;
  • 허성강 (창원대학교 공과대학 금속재료공학과)
  • 발행 : 2000.09.01

초록

상압 소결법과 통전활성 소결(Plasma Activated Sintering; PAS)법으로 120$0^{\circ}C$부터 150$0^{\circ}C$의 온도범위에서 제조된 지르코니아의 기계적 특성을 ring on ring disk 굽힘시험으로 비교하여 고찰하였다. 모든 소결온도범위에서 PAS법으로 제조된 소결체의 밀도와 경도는 상압 소결법에 의해 제조된 소결체 보다 높게 나타났다. 결정립의 크기는 두 소결법에 의해 제조된 소결체 모두에서 소결온도 증가에 따라 증가하였으나, PAS법으로 제조된 소결체가 상압 소결법으로 제조된 소결체 보다는 결정립 성장이 억제되었다. 파괴인성은 PAS법으로 제조된 소결체의 경우 130$0^{\circ}C$에서 최고값을 나타낸 후 소결온도 증가에 따라 미세하게 감소하였으며, 상압 소결법으로 제조된 소결체의 경우 소결온도 증가에 따라 증가되었다. 소결체의 상분율 변화는 PAS법으로 제조된 경우 전 온도범위 (1200~150$0^{\circ}C$)에서 정방정상만 관찰되었으며, 상압 소결법의 경우 단사정상과 정방정상의 혼합상을 나타내었고, 소결온도 증가에 따라 정방정상의 비율이 증가하였다. 결과적으로 PAS법의 경우 지르코니아의 최적 소결온도는 130$0^{\circ}C$이며, 상압 소결법의 경우 150$0^{\circ}C$임을 알 수 있었으며, 소결체의 파괴인성에 미치는 영향은 결정립 크기 및 정방정상의 분율임을 확인할 수 있었다.

키워드

참고문헌

  1. Science and Technology of Zirconia III, Adv in Ceramics v.3 no.1 Zirconia-an Overview E. C. Subbarao
  2. J. of. Mat. Sci. v.17 Transformation Toughening Part 1: Size Effects Associated with the Thermodynamics of Constrained transformations F. F. Lange
  3. Science and Technology of Zirconia III, Adv. in Ceramics v.12 Toughening Mechanisms in Zirconia Alloys A. G. Evens
  4. J. of Kor. Ceram. Soc. v.28 no.7 Sinterability and Stability of Tetragonal Zirconia Polycrystals Co-Stabilized by CeO₂ and Other Oxides J. H. Park;S. W. Moon
  5. Science and Technology of Zirconia II, adv in Ceramics v.12 Microstructural Design of Zirconia-toughened Ceramics(ZTC) N. Cloussen
  6. J. of Mat. Sci. v.17 Transformation Toughneing F. F. Lange
  7. J. Kor. Inst. Met. & Mater. v.30 no.7 Resistance/Spark Sintering under Pressure of Intermetallic TiAl Powders G. S. choi;J. Y. Kim;D. H. Lee
  8. Plama Synthesis and Processing of Materials Plasma Activated Sintering a Novel Versatile J. R. Groza;S. H. Rishud;K. Yamazaki;K. Upadhya(ed.)
  9. J. of Soc. Power Tech. Japan. v.30 no.11 Trends in Advanced SPS Spark Plasma Sintering Systems and Technology M. Tokita
  10. J. of Mater.Eng. and Perform v.2 no.10 Plasma-Activated Sintering of Aluminum Nitride J. E. Hensley, Jr;S. H. Risbud;J. R. Groza;K. Yamazaki
  11. J. Kor. Ceram. Soc. v.32 no.12 A Study on Zirconia/Metal Functionally Gradient Materials by Sintering Method(III) Y. G. Jung;S. C. Choi;C. W. Park
  12. Metall Trans. v.22A A Simple versatile Miniaturized Disk-Bend Test Apparatus for Quantitative Yield-Stress Measurements H. Li;F. C. Chen;A. J. Ardell
  13. J. Mater. Res. v.6 no.9 Measurement of the Fracture Toughness of CVD-grown ZnS Using a Miniaturized Disk-bend Test J. Zhang;A. J. Ardell
  14. J. of Testing and Evaluation v.21 no.4 Optimization of Test Parameter for Quantitative Strss Measurements Using the Miniaturized Disk-Bend Test D. E. Meyers;F. C. Chen;J. Zhang;A. J. Ardell
  15. Metall. and Mater. Trans. v.28A no.4 Fracture Toughness of Polycrytalline NiAl from Finite Element Analysis of Miniaturized Disk-Bend Test Results S. J. Eck;A. J. Ardell
  16. J. of Am. Soc. v.62 no.9 Biaxial and Uniaxial Data for Statistical Comparisons of a Ceramic's Strength M. N. Giovan;G. Sines
  17. J. of Am. Ceram. Soc. v.76 no.5 Measurment of the Fracture toughness of Ceramic Materials Using a Miniaturized Disk-Bend Test J. Zhang;A. J. Ardell
  18. J. of Am. Ceram. Soc. v.55 no.6 Phase Analysis in Zirconia Systems R. C. Garvie;P. S. Nicholson
  19. Science and Technology of Zirconia III, adv in Ceramics v.24 Influence of ZrO₂ Particle Size on toughness In Hot-Pressed Y-TZP L. Gao;T. S. Yen;J. K. Guo