네트워크 표현을 이용한 트윈서보 시스템의 모델링과 강건 동기 동작 제어

Modeling and Robust Synchronizing Motion Control of Twin-Servo System Using Network Representation

  • 김봉근 (포항공과대학교 기계공학과) ;
  • 최현택 (한양대학교 전자공학과) ;
  • 정완균 (포항공과대학교 기계공학과) ;
  • 서일홍 (한양대학교 전자공학과) ;
  • 송중호 (한국과학기술연구원)
  • 발행 : 2000.10.01

초록

A twin-servo mechanism is used to increase the payload capacity and assembling speed of high precision motion control systems such as semiconductor chip mounters. In this paper, we focus on the modeling of the twin-servo system and propose its network representation. And also, we propose a robust synchronizing motion control algorithm to cancel out the skew motion of the twin-servo system caused by different dynamic characteristics of two driving systems and the vibration generated by high accelerating and decelerating motions. The proposed control algorithm consists of separate feedback motion control algorithms for each driving system and a skew motion compensation algorithm. A robust tracking controller based on internal-loop compensation is proposed as a separate motion controller and its disturbance attenuation property is shown. The skew motion compensation algorithm is also designed to maintain the synchronizing motion during high speed operation, and the stability of the whole closed loop system is proved based on passivity theory. Finally, experimental results are shown to illustrate control performance.

키워드

참고문헌

  1. B. K. Kim, W. K. Chung, K. B. Lee, J. H. Song, and I. Choy, 'Modeling and synchronizing motion control of twin-servo system,' Proc. 1999 Korea Automatic Control Conference, pp. 302-305, 1999
  2. 안승욱, 최만수, 박영준, 김재훈, '2축 구동방식을 갖는 대형 겐트리 로봇 시스템의 주행축 동기제어,' 1998 한국정밀공학회 춘계학술대회 논문집, pp. 436-439, 1998
  3. G. J. Raju, G. C. Verghese, and T. B. Sheridan, 'Design issues in 2-port network models of bilateral remote manipulation,' Proc. 1989 IEEE Int. Conf. on Robotics and Automation, pp. 1316-1321, 1999 https://doi.org/10.1109/ROBOT.1989.100162
  4. Y. Yokokohji and T. Yoshikawa, 'Bilateral control of master-slave manipulators for ideal kinesthetic coupling-formulation and experiment,' IEEE Trans. on Robotics and Automation, vol. 10, no. 5, pp. 605-620, October, 1994 https://doi.org/10.1109/70.326566
  5. H. S. Lee and M. Tomizuka, 'Robust motion controller design for high-accuracy positioning systems,' IEEE Trans. on Industrial Electronics, vol. 43, no. 1, pp. 48-55, February, 1996 https://doi.org/10.1109/41.481407
  6. B. K. Kim, W. K. Chung, H. T. Choi, I. H. Suh, and Y. H. Chang, 'Robust optimal internal loop compensator design for motion control of precision linear motor,' Proc. 1999 IEEE Int. Symposium on Industrial Electronics, pp. 1045-1050, 1999 https://doi.org/10.1109/ISIE.1999.796773
  7. B. K. Kim, W. K. Chung, H. T. Choi, 1. H. Suh, H. S. Lee, and Y. H. Chang, 'Robust time optimal controller design for HDD,' IEEE Trans. on Magnetics, vol. 35, no. 5, pp. 3598-3600, 1999 https://doi.org/10.1109/20.800602
  8. H. T. Choi, B. K. Kim, I. H. Suh, and W. K. Chung, 'Design of robust high-speed motion controller with actuator saturation,' to be appeared in Trans. ASME J of Dyn: Syst., Meas. and Contr
  9. B. Yao, M. Al-Majed, and M. Tomizuka, 'High performance robust motion control of machine Tools:An adaptive robust control approach and comparative experiments,' IEEE/ASME Trans. on Mechatronics, vol. 2, no. 2, pp, 63-76, June, 1997 https://doi.org/10.1109/3516.588624
  10. K. Yamada, S. Komada, M. Ishida, and T. Hori, 'Analysis and classical control design of servo system using high order disturbance observer,' Proc. 1998 IEEE Int. Conf. on Industrial Electronics, Control, and Instrumentation, pp. 4-9, 1998 https://doi.org/10.1109/IECON.1997.670904
  11. J. E. Colgate, 'Power and impedance scaling in bilateral manipulation,' Proc. 1991 IEEE Int. Conf. on Robotics and Automation, pp. 2292-2297, 1991 https://doi.org/10.1109/ROBOT.1991.131973
  12. T. Yoshikawa and J. Ueda, 'Analysis and control of master-slave systems with time delay,' Proc. 1996 IEEE/RSJ Int. Con! on Intelligent Robots and Systems, pp. 1366-1373, 1996 https://doi.org/10.1109/IROS.1996.568994
  13. Richard Y. Chiang and Michael G. Safonov, Robust Control Toolbox, Mathworks, Inc. 1992