대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제24권12호
  • /
  • Pages.2995-3002
  • /
  • 2000
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

전기비저항법을 이용한 재료열화 평가

Evaluation of Material Degradation Using Electrical Resistivity Method

  • 발행 : 2000.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The remaining life estimation for the aged components in power plants as well as chemical plants are very important beacuse mechanical properties of the components are degraded with time of service exposure in high temperature. Since it is difficult to take specimens from the operating components to evaluate mechanical properties of components nondestructive techniques are needed to estimate the degradation. In this study, test materials with 4 different degradation levels were prepared by isothermal aging heat treatment at 630$\^{C}$. And the DC potential drop method and destructive methods such as tensile, K(sub)IC and hardness tests were used in order to evaluate the degradation of 1-Cr-1Mo-0.25V steels. The objective of this study is to investigate the possibility of the application of DCPD method to estimated the material degradation, and to analyse the relationship between the electrical relationship between the electrical resistivity and the degree material degradation.

키워드

참고문헌

  1. Viswanathan, R. and Gehl, S., 1991, 'A Method for Estimation of the Fracture Toughness of Cr-Mo-V Rotor Steels Based on Composition,' Journal of Engineering Materials and Technology, (Transactions of the ASME), Vol. 113, pp. 263-270
  2. Viswanathan, R. and Bruemmer, S. M., 1985, 'In-service Degradation of Toughness of Steam Turbine Rotors,' Journal of Engineering Materials and Technology, (Transactions of the ASME), Vol. 107, pp. 316-324
  3. 남승훈, 김엄기, 유광민, 1998, 'Nondestructive Evaluation of Toughness Degradation of 1Cr-1Mo-0.25V Steel Using Electrical Resistivity,' 대한기계학회논문집 A, Vol. 22, No. 5, pp. 814-820
  4. 석명진, 최질현, 이동철, 문인훈, 1994, 'Sb-InSb 및 Sn-Bi 공정합금의 미세조직과 전기비저항,' 한국재료학회지, Vol. 4, No. 1, pp. 97-106
  5. Park, Y. K. and Ahn, B. Y., 1989, 'Nondestructive Evaluation of Tempering Process of S45C Steel using DC Potential Drop Measurement,' Journal of Korean Society for Nondestructive Testing, Vol. 9, No. 1, pp. 77-78
  6. ASTM B193-87, 1992, 'Standard Test Method for Resistivity of Electrical Conductor Materials,' Annual Book of ASTM Standard, pp. 308-311
  7. ASTM F84-93, 1993, 'Standard Test Method for Measuring Resistivity of Sillicon Wafers with an In-Line Four-Point Probe,' Annual Book of ASTM Standard, pp. 135-147
  8. Valdes, A. B., 1954, 'Resistivity Measurements on Germanium for Transistors,' Proceedings of the IRE, pp. 420-427 https://doi.org/10.1109/JRPROC.1954.274680
  9. ASTM F43-93, 1993, 'Standard Test Methods for Resistivity of Semiconductor Materials,' Annual Book of ASTM Standard, pp. 50-56
  10. Smits, F. M., 1958, 'Measurement of Sheet Resistivities with the Four Point Probe,' The Bell System Tech. Journal, Vol. 37, pp. 711-718
  11. Logan, M. A., 1967, 'Sheet Resistivity Measurements on Rectangular Surfaces-General Solution for Four Point Probe Conversion Factors,' The Bell System Tech. Journal, pp. 2277-2322
  12. Shi, J. and Sun, Y., 1997, 'New Method of Calculating the Correction Factors for the Measurement of Sheet Resistivity of Square with a Square Four-Point Probe,' Review of Scientific Instruments, Vol. 68, No. 4, pp. 1814-1817 https://doi.org/10.1063/1.1147998
  13. Yamashita, M., Nishii, T. and Kurihara, H., 1996, 'Resistivity Correction Factor for the Four-Point Probe Method on Cylinderical Materials,' Japanese Journal of Applied Physics, Vol. 35, pp. 1948-1953 https://doi.org/10.1143/JJAP.35.1948
  14. Abdel-Latif, A. M., Corbett, S. M. and Taplin, D. M. R., 1982, 'Analysis of Carbides Formed During Accelerated Aging of 2.25Cr-1Mo Steel,' Metal Science, Vol. 16, pp. 90-96
  15. Abdel-Latif, A. M., Corbett, J. M., Sidey, D. and Taplin, D. M. R., 1981, 'Effects of Microsturctural Degradation on Creep Life Prediction of 2-1/4Cr-1Mo Steel,' Avanced in Fracture Research, (Proc. of 5th Int. Conf. On Fracture(ICF5)), Vol. 4, pp. 1613-1620