Journal of the Korean Geotechnical Society (한국지반공학회논문집)

Korean Geotechnical Society (한국지반공학회)
권호 표지

Anisotropy in Strength and Deformation Properties of a Variety of Sands by Plane Strain Compression Tests(Part III) -Shear Deformation Characteristics-

평면변형률압축시험에 의한 각종 모래의 강도.변형특성의 이방성(III) -전단변형 특성-

  • 박춘식 (정회원, 창원대학교 공과대학 토목공학과) ;
  • 황성춘 (정회원, 경주대학교 공과대학 건설환경시스템공학부) ;
  • 장정욱 (정회원, 청주대학교 공과대학 자원공학과)
  • Published : 2000.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Anisotropy of stiffiness, from extremely small strains to post-failure strains, of isotropically consolidated air-pulviated sands in plane strain compression was studied by using the newly developed instrumentation for small strain measurements. Seven types of sand of the world-wide origins were tested, which have been extensively used for research purposes. Stress-strain relationships for a wide range of strain from about 0.0001% to 10% were obtained with measuring axial and lateral strains locally free from the effects of bedding and membrane penetration errors at the specimen boundaries. It was found that the maximum shear modulus Gmax was irrespective of the angle $\delta$of the $\sigma$1 direction relative to the bedding plane. However, the normalized Gmax was varied with the types of sand. Furthermore, the dependency of the strain and stress level on the stiffness increased as decreased.

공중낙하법에 의해 만든 등방압밀 모래공시체를 미소변형률 측정장치를 사용한 평면변형률압축시험을 실시하여 미소변형률에서 파괴후까지의 전단강성계수에 대한 이방성을 연구하였다. 세계각국의 주요 연구기관에서 사용되고 있는 7종류의 연구용 표준사 공시체를 멤브레인의 관입에 의한 오차와 변위를 외부에서 측정함으로 하여 생기는 오차(bedding error)등의 영향을 제거하여 측정한 최대주응력방향의 변형률과 최소주응력방향의 변형률을 각각 0.0001%에서 10%까지 넓은 범위에 걸친 응력-변형률 관계를 얻었다. 그 결과 최대전단강성계수 Gmax는 퇴적면과 최대주응력 $\sigma$1이 이루는 각도 $\delta$에 관계없이 일정하였다. 그러나 정규화한 Gmax는 모래의 종류에 따라 달랐다. 또 전단강성계수의 변형률 수준과 응력 수준에 대한 의존성은 $\delta$가 감소함에 따라 증가하였다.

Keywords

References

  1. 한국지반공학회지 v.10 no.1 평면 변형률 압축상태에서의 모래의 미소 변형률 측정 박춘식;龍岡文夫;장정욱;정진교
  2. 砂と礫の實內せん斷試驗における斷面摩擦輕減 v.44 no.5 朴春植;後藤聽;龍岡文夫
  3. 平面ひずみ壓縮試驗による名鐘の砂の變形·强度特性 朴春植
  4. Inherent Anisotropy in a Sand v.22 no.1 Arthur, J. R. F.;Menzies, B. K.
  5. Induced Anisotropy in a Sand v.27 no.1 Arthur, J. R. F.;Dunstan, T.
  6. The Engineering Application of Direct and Simple Shear Testing v.38 no.4 Arthur, J. R. F.;Dunstan, T.
  7. Soils and Foundations v.31 no.1 A Simple Gauge for Local Small Strain Measurements in the Laboratory Goto, S.;Tatsuoka, F.;Shibuya, S.;Sato, T.
  8. Soils and Foundations v.17 no.3 Effects of Grain Size and Grading on Dynamic Shear Moduli of Sands Iwasaki, T.;Tatsuoka, F.
  9. Soils and Foundations v.28 no.1 Effects of Initial Anisotropic Fabric and σ2 on Strength and Deformation Chracteristics of Sand Lam, W. K.;Tatsuoka, F.
  10. Soils and Foundations v.12 no.1 Initial Fabrics and their Relations to Mechanical Properties of Granular Material Oda, M.
  11. Journal of GE Div., Proc. of ASCE, 107~GT9 Anisotropic Strength of Cohesionless Sands Oda, M.
  12. Soils and Foundations v.18 no.1 Experimental Study on Anisotropic Shear Strength of Sand by Plane Strain Test Oda, M.;Koishikawa, I.;Higuchi, T.
  13. SEISAN-KENKYU v.42 no.10 Strength and Deformation Anisotropy of Dense Silver Leighton Buzzard sand in Plane Strain Compression Park, C. S.;Tatsuoka, F.;Shibuya, S.
  14. Proceedings of 25th Annual Meeting of Japanese Society of Soil Mechanics and Foundation Engineering Anisotropy in Deformation and Strength of Silver Leighton Buzzard sand by Plane Strain Compression Tests Park, C. S.;Shinmei, S.;Tatsuoka, F.;Shibuya, S.
  15. Proceedings of 26th Annual Meeting of Japanese Society of Soil Mechanics and Foundation Engineering Anisotropy in Strength and Deformation of Sand by Plane Strain Compression Tests Park, C. S.;Takeda, E.;Tatsuoka, F.
  16. Proceedings of 27th Annual Meeting of Japanese Society of Soil Mechanics and Foundation Engineering Anisotropy in Strength and Deformation Characteristics of Dense Sands in Plane Strain Compression Park, C. S.;Sakata, J.;Tatsuoka, F.
  17. Soils and Foundations v.26 no.1 Strength and Deformation Characteristics of Sand in Plane Strain Compression at Extremely Low Pressures Tatsuoka, F.;Sakamoto, M.;Kawamura, T.;Fukushima, S.