한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제17권11호
  • /
  • Pages.191-198
  • /
  • 2000
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

레이저 직접 패터닝에 의한 그라비아 망점 형성

Gravure Halftone Dots by Laser Direct Patterning

  • 서정 (한국기계연구원 레이저기술연구그룹) ;
  • 한유희 (한국기계연구원 레이저기술연구그룹) ;
  • 강래혁 (한국기계연구원 레이저기술연구그룹)
  • Suh, Jeong (Laser Technology Research Group, Korea Institute of Machinery and Materials) ;
  • Han, You-Hie (Laser Technology Research Group, Korea Institute of Machinery and Materials) ;
  • Kang, Lae-Heuck (Laser Technology Research Group, Korea Institute of Machinery and Materials)
  • 발행 : 2000.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Laser direct patterning of the coated photoresist (PMER-NSG31B) layer was studied to make halftone dots on gravure printing roll. The selective laser hardening of photoresist by Ar-ion laser(wavelength: 333.6~363.8nm) was controlled by the A/O modulator. The coating thickness in the range of 5~11$\mu m$ could be obtained by using the up-down directional moving device along the vertically located roll. The width, thickness and hardness of the hardened lines formed under the laser power of 200~260㎽ and irradiation time of 4.4~6.6 $\mu$sec/point were investigated after developing. The hardened width increased as the coating thickness increased. Though the hardened thickness was changed due to the effect of the developing solution, the hardened layer showed good resistance to the scratching of 2H pencil. Also, the hardened minimum line widths of 10$\mu m$ could be obtained. The change of line width was also found after etching, and the minimum line widths of 6$\mu m$ could be obtained. The hardened lines showed the good resistance to the etching solution. Finally, the experimental data could be applied to make gravure halftone dots using the developed imaging process, successfully.

키워드

참고문헌

  1. Chan Y. C, Lam Y. L., Zhou Y, Xu F. L., Liaw C. Y. Jiang W. and Ahn J. S, 'Development and Application of Laser Writing Lithography System for Maskless Patterning,' Optical Engineering, Vol. 37, No. 9, pp. 2521-2530, 1998 https://doi.org/10.1117/1.601760
  2. Schaper C. D., Kailath T., EL-Awady K. and Tay A., 'Application of Control and Signal Processing to the Microlithography Process,' Proceeding of the 1999 IEEE 25th Annual Conference of The IEEE Industrial Electronics Society, Vol. 1 V.l, 1999 https://doi.org/10.1109/IECON.1999.822159
  3. Ayraas P., Jabbour G. E., Honkanen S. and Peyghambarian N, 'Self-aligned Photoresist Patterning for Integrated Optics,' Optical Engineering, Vol. 39, No. 2, pp. 575-576, 2000 https://doi.org/10.1117/1.602436
  4. Baumann B. and Bargon J., 'Conducting polymer pattern via Laser Processing,' Applied Surface Science 106 pp. 287-292, 1996 https://doi.org/10.1016/S0169-4332(96)00423-0
  5. Witzgall G., Vrijen R. and Yablonovitch E., 'Single-shot Two-photon exposure of Commercial Photoresist for the production of Three-dimensional Structures,' Optics Letters, Vol. 23, No. 22, pp. 1745-1747, 1998
  6. Saint Christophe E., Fremont H. N'kaoua G. and Danto Y., Application of the Theoretical Model for Line Width Control in Photoresists Sensitized by a Laser Beam,' Electronics Letters, Vol. 33, No. 12, pp. 1049-1051, 1997 https://doi.org/10.1049/el:19970738
  7. Arnone C, 'The Laser-plotter : A Versatile Lithographic Tool for Integrated Optics and Microelectronics,' Microelectronic Engineering, Vol. 17, pp. 483-486, 1992 https://doi.org/10.1016/0167-9317(92)90099-D
  8. von Gutfeld R. J., Gelchinski M. H. and Romankiw L. T., 'Maskless Laser Patterning for Gold Plating of Microelectronic Materials,' J. Electorchem. Soc, Vol. 130, No. 9, pp. 1840-1844, 1983 https://doi.org/10.1149/1.2120108
  9. Hirayuki O., 'Photoresit for PDP,' Electronic Parts and Materials, Vol. 37, No. 2, pp. 45-48, 1998
  10. Ahn B. Y., 'Printing Engineering,' Sejinsa, Korea, 1997
  11. Shin J. S., 'Gravure Printing & Flexible Packaging,' Insoegaesa, Korea, 1989
  12. Xiao H. H., 'Laser Technology Application in Gravure Printing,' Proc. SPIE Vol. 2118, pp. 209-212, 1994 https://doi.org/10.1117/12.176670
  13. 'Gravure Process and Technology,' Gravure Association of America, 1991
  14. Suh J., Bae S. H. and Han Y. H.,'Gravure 1.2,' S/W Registration No. 99-01-12-6264 (Korea), 1999
  15. Delabastita P. A., 'Screening techniques, moire in four color printing,' Proc. TAGA, pp. 44-65. 1992
  16. Ihrig S and Ihrig Emil, 'Preparing digital image for print,' McGraw-Hill book Co., Singapore, 1996