참고문헌
- Charnley, J., 'Total hip replacement by low-friction arthorplasty,' Clin. Orthop. Rel. Res., Vol. 72, pp. 7 -21, 1972
- Carlsson, A., and Gentz, C-F., 'Mechanial loosening of the femoral head prosthesis in the Charnley total hip arthroplasty,' Clin. Orthop., Vol. 147, pp. 262 - 270, 1980
- Harris, W., McCarthy, J., and O'Neill, D., 'Femoral component loosening using contemporary techniques of femoral cement fixation,' J. Bone Joint Surg., Vol. 64, pp. 1063 - 1067, 1982
- Webber, B., 'Pressurized cement fixation in total hip arthroplasy,' Clin. Orthop., Vol. 232, pp. 87 - 95, 1988
- Greenwald, A., and O'Connor, J., 'The transmission of load through the hip joint,' J Biomechanics, Vol. 4, pp. 507 - 513, 1971 https://doi.org/10.1016/0021-9290(71)90041-8
- Allan, C, Jasty, M., and Harrigan, T., 'A comparison of the joint reaction forces measured with an instrumented prosthesis and calculated from gait analysis,' ORS Trans., Vol. 13, p. 322, 1989
- Williams, D., and Meachim, G., 'A combined metallurgical and histological study of tissse-prosthesis interactions in orthopedic patients,' J Biomed. Mater. Res., Vol. 8, pp. 1 - 9, 1974
- Agins, H., Alcock, N., and Bansal, M., 'Metallic wear in failed tatinium total hip replacements: a histological and quantitative analysis,' J Bone Joint Surg (A)., Vol. 70, pp. 347 - 356, 1988
- Wroblewski, B., 'Fractured stem in total hip replacement. A clinical review of 120 cases,' Acta Orthop. Scand., Vol. 53, pp. 279 - 284, 1982
- Brauer, G., Steinberger, D., and Stansbury, J., 'Dependence of curing time, peak temperature and mechanical properties on the composition of bone cement,' J Biomed. Mater. Res., Vol. 20, pp. 839 -852, 1986 https://doi.org/10.1002/jbm.820200614
- Frost, H., 'The regional acceleratory phenomenon,' Henry Ford Hosp. Med. J., Vol. 31, pp. 3 - 9, 1983
- Eyerer, P., and Ke, Y, 'Property changes of UHMW polyethylene hip cup endoprostheses during implantation,' J Biomed. Mater. Res., Vol. 18, pp. 1137-1151,1984 https://doi.org/10.1002/jbm.820180915
- Haddad, R., Cook, S., and Brinker, M., 'A comparison of three varieties of noncemented porous-coated hip replacement,' J Bone Joint Surg. (B), Vol. 72, pp. 2 - 8, 1990
- Long, M., and Rack, H., 'Riview: Titanium alloys in total joint replacement - a materials science perspective,' Biomaterials, Vol. 19, pp. 1621 - 1639, 1998 https://doi.org/10.1016/S0142-9612(97)00146-4
- Hall, R., and Unsworth, A., 'Riview: Friction in hip prostheses,' Biomaterials, Vol. 18, pp. 1017 -1026, 1997 https://doi.org/10.1016/S0142-9612(97)00034-3