SI 엔진 피스톤-링의 마찰모드

The Frictional Modes of Piston Rings for an SI Engine

  • 조성우 (회원, 한국과학기술원 기계공학과) ;
  • 최상민 (회원, 한국과학기술원 기계공학과) ;
  • 배충식 (회원, 한국과학기술원 기계공학과)
  • 발행 : 2000.09.01

초록

Friction forces of piston rings for a typical SI engine were independently measured while excluding the effects of cylinder pressure, oil starvation and piston secondary motion using a floating liner system. Friction patterns, represented by the measured friction forces, were classified into five frictional modes with regard to the combination of predominant lubrication regimes(boundary, mixed and hydrodynamic lubrication) and stroke regions(mid-stroke and dead centers). The modes were identified on the Stribeck diagram of the dimensionless bearing parameter and friction coefficients which were evaluated at the mid-stroke and at the dead centers. And the frictional modes were estimated to the full operation range. The compression rings behave in the mode where hydrodynamic lubrication is dominant at the mid-stroke and mixed lubrication is dominant at the dead centers under steady operating conditions. However, the oil control ring behave in the mode where mixed lubrication is dominant throughout the entire stroke.

키워드

참고문헌

  1. Tribology International v.27 no.1 Trends in Engine Technology and Tribolgy Nakada, M.
  2. Internal Combustion Engine Fundamentals Heywood, J. B.
  3. SAE Paper952309 Influence of Piston Design on Exhaust Gas Emissions of Gasoline Engines Freier, R.;Schelling, H.
  4. 한국자동차공학회논문집 v.8 no.3 윤활유가 충분한 배럴형 피스톤-링의 마찰모드 조성우, 최상민, 배충식
  5. Engineering Tribology Williams, J. A.
  6. Internal Combustion Engine Fundamentals Heywood, J. B.
  7. Proc. Inst. Mech. Engrs. v.187 no.49/73 Thermal Loading of a Petrol Engine French, C. C. J.;Atkin, K. A.
  8. JSAE Review Effect of Oil Properties on Piston Frictional Forces Furuhama, S.;Sasaki, S.
  9. JSME Series B v.36 no.4 New Device for Piston-Ring Assembly Friction Force Measurement in IDI Engine Yun, J. E.;Kim, S. S.