Abstract
Corrosion behavior of Fe-Ni-Cr alloy in molten salts of LiCl and LiCl-$Li_2O was investigated in the tempera-ture range of $650~850^{\circ}C$. In the molten salt of LiCl, and internal oxidation of Fe occurred in the KSA(Kaeri Superalloy)-1 alloy without containing Cr, while a dense protective oxide scale of $LiCrO_2$ was formed in the KSA-4, Incoloy 800H and KSA-5 alloys. In the mixed molten salt of LiCl-$Li_2O$, internal oxidation of Fe and Cr took place in the KSA-1 and KSA-4 alloys, respectively. Non-protective porous oxide scales consisting of $LiCrO_2$ and Ni were formed in the Incoloy 800H and KSA-5. The corrosion rate of the alloys increased with the increase in Cr content and the corrosion rate followed the parabolic law for the alloy containing Cr content less than 8%, and the linear law for the alloy containing Cr content more than 8%. Such a corrosion behavior of the alloy in the mixed molten salt of LiCl-$Li_2O$ was interpreted in terms of the basic fluxing mechanism of protective oxide scale of $Cr_2O_3$.
Fe-Ni-Cr 합금의 용융염 부식거동을 $650~850^{\circ}C$ 온도범위에서 조사하였다. 용융염 LiCl에서 Cr을 포함하지 않는 KSA(Kaeri Superalloy)-1 합금은 Fe의 내부산화가 발생하고, Cr을 포함한 KSA-4, Incoloy 800H와 KSA-5는 LiCrO$_2$의 치밀한 보호막이 형성되었다. 혼합용융염 $LiCl-LiO_2$O에서 KSA-1은 Fe의 내부산화, KSA-4는 Cr의 내부산화가 발생하였고, Cr 농도가 높은 Incoloy 800H와 KSA-5는 $LiCrO_2$의 다공성 피 이 형성되었다. 혼합용융염 $LiCl-Li_2$O 에서는 Cr 농도의 증가에 따라 부식속도가 증가하였으며, 부식속도는 시간의존선을 8%Cr 이하의 합금에서는 포물선법칙, 8%Cr 이상의 합금에서는 직선법칙을 나타내었다. 이러한 현상은 Li$_2$O에 의한 보호성 산화물 $Cr_2O_3$의 염기성 용해기구로 설명할 수 있다.