A Robust $H^{\infty}$ Controller for Active Suspensions Based on a Full-Car Model

차량의 능동형 현가장치를 위한 강인한 $H^{\infty}$ 제어기 설계

  • Published : 2000.02.01

Abstract

An $H\infty$ controller is designed for active suspensions of vehicles using 7-degree-of-freedom full-car model. Its performance robustness as well as stability robustness to system parameter variations and unmodelled dynamics are assured through the $\mu$-framework. The performance of the $H\infty$ controller is compared with that of a LQC controller in compute simulations. From the simulations it is found that the active suspension with the $H\infty$ controller reduces the acceleration and motion of the sprung mass in the heaving rolling and pitching directions when the car is driven on a normal road or through an asymmetric bump. The suspension stroke and the road holding capability are also improved with a relatively small level of power consumption. Overall the $H\infty$ controller shows a more robust performance than that of the LQG design.

Keywords

References

  1. A. Hac, 'Adaptive control of vehicle suspension,' Vehicle System Dynamics, vol. 16, pp. 57-74, 1987 https://doi.org/10.1080/00423118708968870
  2. C. Yue, T. Butsuen, and J. K. Hedrick, 'Alternative control laws for automotive active suspensions,' ASME Journal of Dynamic Systems, Measurement and Control vol. 111, pp. 286-291, 1989
  3. L. R. Ray, 'Robust linear-optimal control laws for active suspension systems,' ASME Journal of Dynamic Systems, Measurement and Control, vol. 114, pp. 592-598, 1992
  4. P. Michelberger, L. Palkovics, and J. Boker, 'Robust design of active suspension system,' Int. J, of Vehicle Design, vol. 14, pp. 145-165, 1993
  5. P. Barak and D. Hrovat, 'Application of the LQG approach to design of an automotive suspension for three-dimensional vehicle models,' Proa of IMechE PP. 11-26, 1988
  6. D. A. Crolla and M. B. A. Abdel-Hady, 'Active suspension control; performance comparisons using control laws applied to a full vehicle model,' Vehicle System Dynamics, vol. 20, pp. 107-120, 1991 https://doi.org/10.1080/00423119108968982
  7. I. Cech, 'A full-car roll model of a vehicle with controlled suspension,' Vehicle System Dynamics, vol. 23, pp. 467-480, 1994 https://doi.org/10.1080/00423119408969070
  8. J. H. Park and Y. S. Kim, 'Decentralized variable structure control,' Proc. of IEEE Conf. on Control Applications, Trieste, Italy, September, 1998
  9. K. Glover and J. C. Doyle, 'State-space formulae for All stabilizing controllers that satisfy an $H^{\infty}$-norm bound and relations to risk sensitivity,' System and Control Letters, vol. 11, pp. 167-172, 1988 https://doi.org/10.1016/0167-6911(88)90055-2
  10. J. C. Doyle, K. Glover, P. P. Khargonekar, and B. A. Francis, 'State-space solutions to $H_2$, and $H^{\infty}$ control problems,' IEEE Trans, Automatic Control vol. 34, no. 8, pp. 831-847, 1989 https://doi.org/10.1109/9.29425
  11. A. Packard, J. Doyle, and G. Balas, 'Linear mul-tivariable robust control with a ${\mu}$ perspective,' ASME Journal of Dynamic Systems, Measurement and Control vol. 115, pp. 426-438, 1993
  12. K. R. Lee, D. C. Oh, and H. B. Park, 'Robust $H^{\infty}$ performance controller design with parameter uncertainty and unmodeled dynamics,' Journal of Korean Control, Automation and Systems Engineering; vol. 3, no. 1, pp. 9-16, 1997
  13. G. Balas and A. Packard, 'The structured singular value $({\mu})$ framework,' in Control Handbook (W. S. Levine, ed.), CRC Press, 1996
  14. J. M. Maciejowski, Multivariable Feedback Design Addison Wesley, 1989
  15. K. Zhou, J. Doyle, and K. Glover, Robust and Optimal Control. Prentice Hall, 1996
  16. T. D. Gillespie, Fundamentals of Vehicle Dynamics. Society of Automotive Engineers, 1992
  17. D. Bastow and G. Howard, Car Suspension and Handling, SAE, 1993