The Transactions of the Korean Institute of Electrical Engineers B (대한전기학회논문지:전기기기및에너지변환시스템부문B)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Modeling and Controller Design of an Automotive HID Lamp Ballast

자동차 헤드라이트용 고압 방전등 안정기 시스템의 모델링 및 제어기 설계

  • 이인규 (서울대 대학원 전기공학부) ;
  • 최성진 (서울대 대학원 전기공학부) ;
  • 이규찬 (서울대 대학원 전기공학부) ;
  • 조보형 (서울대 대학원 전기공학부·)
  • Published : 2000.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents design and analysis of an HID lamp ballast for a fast turn on characteristics and stable operation. It produces a high open circuit voltage for the ignition and it is controlled to supply effectively the power required to shorten the warm-up period after the breakdown. The lamp modeling by empirical data is presented. It is very effective in the designing of the control loop in the steady-state operating region. A stable operation of the lamp power regulation in the steady state is achieved, which is crucial for the long life time and constant light output. Stability analysis of the system is performed and the results are verified through various simulation results and the hardware experiments.

Keywords

References

  1. W. Elenbaas, Light Sources, Philips Technical Library, Macmillan Press Ltd., 1972
  2. J. F. Waymouth, ' The Glow to Thermionic Arc Transition,' J. IES, Summer, 1987, pp.166-180
  3. H-J. Faehnrich and E. Rasch 'Electronic Ballasts for Metal Halide Lamps', Journal of the Illuminating Engineering Society, pp.131-140, Summer, 1989
  4. M. Gulko and S. Ben-Yaakov, 'A MHz Electronic Ballast for Automotive-Type HID Lamps ', PESC-97, pp.39-45, June 1997 https://doi.org/10.1109/PESC.1997.616652
  5. E. Rasch and E. Static 'Behavior of Metal Halide Lamps with Conventional and Electric Ballasts', Journal of the Illuminating Engineering Society, pp88-96, Summer, 1991
  6. P. H. Herrick, 'Mathematical Models for High Intensity Discharge Lamps,' IEEE Trans. IA, Vol.IA-16,No.5, Sep./Oct., 1980
  7. C. S. Moo, Y. C. Chuang, Y. H. Huang, H. N. Chen, 'Modeling of Fluorescent Lamps for dimmable electronic ballasts,'IEEE IAS Conf. Rec.,1996, pp.2231-2236
  8. T. F. Wu, J. C. Hung, T. H. Yu, 'A PSpice Model for Fluorescent Lamps Operated at High Frequencies,' IEEE APEC Conf. Rec.,1995,pp. 359-364 https://doi.org/10.1109/IECON.1995.483422
  9. U Mader, P. Horn, 'A Dynamic Model for the Electrical Characteristics of Fluorescent Lamps,' IEEE IAS Conf. Rec.,1992,pp.1928-1934 https://doi.org/10.1109/IAS.1992.244216
  10. N. Sun, B. Hesterman, 'PSpice High Frequency Dynamic Fluorescent Lamp Model,' IEEE APEC Conf. Rec.,1996, pp. 641-647 https://doi.org/10.1109/APEC.1996.500508
  11. V. J. Francis, 'Fundamentals of Discharge Tube Circuits', John Wiley & Sons, Inc., New York,N.Y.,1948
  12. E. L. Laskowski 'A Model of a Mercury Arc Lamp's Terminal V-I Behavior,' IEEE Trans. IA.Vol. IA-17,No.4, Jul./Aug.,1981
  13. E. Deng, 'Negative Incremental Impedance and Stability of Fluorescent Lamps', IEEE APEC97, pp. 1050-1056 https://doi.org/10.1109/APEC.1997.575779
  14. C. Sanathanan, 'Transfer Function Synthesis as a Ratio of Two Polynomials', IEEE Trans. on Auto. Control. Jan. 1963, pp. 56-58
  15. V. Vorperian, 'Simplified Analysis of PWM Converters Using Model of PWM Switch Part 1: Continuous Conduction Mode' , IEEE Trans. Aerospace and Electronic systems, Vol. 26, No. 3, pp490-496, MAY 1990 https://doi.org/10.1109/7.106126
  16. Bo H. Cho, Modeling and Analysis of Spacecraft Power Systems, Ph. D thesis, Virginia Polytechnic Institute and State University,1985