최적 극배치 기법을 이용한 2관성 공진계의 2자유도 속도제어

Two-Degree-of-Freedom Speed Control of Two-Mass System using Optimal Pole Assignment Method

  • 전돈수 (대전산업대 제어계측공학과) ;
  • 김동화 (대전산업대 제어계측공학과)
  • 발행 : 2000.01.01

초록

In the two-mass servo system driving a load through a flexible shaft, a shaft torsional vibration is often generated. PI controller has been generally used is speed control of such system because of the simplicity of structure and related theory. This paper presents the inertia ratio of the PI servo control system which can be designed by using optimal pole assignment method is fixed. Therefore, it's difficult to obtain the desired control characteristics for different systems only by PI control algorithm. To solve this problems the two-mass speed control system with PID controller is designed by using pole assignment method and an optimum PID parameters are derived by evaluating ITAE(Integral of time multiplied by the absolute error) performance index. But this design method has some problems due to a trade-off between the fast command following property and the attenuation of disturbances and vibrations. In this paper, 2-DOF PID control method which satisfies the command following property, the reduction of overshoot and the property of disturbance rejection at the same time is proposed. This is a practical speed controller using the desired value filter and the feedforward gain. From several simulations, it's clarified that the proposed 2-DOF PID controller is useful for the two-mass system, in comparison with the conventional PID controller.

키워드

참고문헌

  1. 지준근, 송승호, 설승기, 박민호, '2관성계를 갖는 전동기 구동 시스템의 축 비틀림 진동 억제를 위한 속도 제어기,' 대한전기학회 논문지, 제42권, 제8호, pp. 44-53, 1993. 8
  2. 김진수, 김상욱, 김영석, '2관성 공진계를 갖는 유도 전동기의 2자유도 속도제어,' 대한전기학회 논문지, 제46권, 1호, pp. 83-90, 1997. 1
  3. N. Matsui and Y. Hori, 'Advanced technologies in motor control,' Trans. IEE-Jpn, vol. 113-D, no. 10, pp. 1122-1137, Oct., 1993
  4. Y. Matsui, 'Speed control of 2-mass system by PID controller,' Trans. IEE-Jpn, vol. 116-D, no. 4, pp. 441-447, Apr., 1996
  5. S. Ouchi, T. Mita and K. Yano, 'Active vibration control of a motor system by using control theory,' Trans. IEE-Jpn, vol. 113-D, no. 3, pp. 325-332, Mar., 1993
  6. M. Hirata, K. Z. Liu and T. Mita, 'Active vibration control of a 2-mass spring system using ${\mu}$ - Synthesis,' Trans. IEE-Jpn, vol. 114-D, no. 5, pp. 512-519, May, 1994
  7. G. Zhang and J. Furusho, 'A Practical PID controller design for speed servo system,' Trans. IEE-Jpn, vol. 118-D, no. 9, pp. 1095-1096, Sept., 1998
  8. G. Zhang and J. Furusho, 'Control of robot arms using joint torque sensors,' IEEE Control Systems Magazine, vol. 18, no. 1, pp. 48-55, Feb., 1998 https://doi.org/10.1109/37.648629
  9. 김동화, 계장 제어 시스템, 동일출판사, pp. 251-314, 1997
  10. 전돈수, 김동화, '최적 극배치를 이용한 2관성 공진계의 PID 제어기 설계,' 대한전기학회 하계학술대회 논문집, pp. 815-817, 1999. 7